[Q20-Q36] Try HPE6-A75 Free Now! Real Exam Question Answers Updated [Sep 22, 2023]

Rate this post

Try HPE6-A75 Free Now! Real Exam Question Answers Updated [Sep 22, 2023]

Get Ready to Pass the HPE6-A75 exam with HP Latest Practice Exam

HPE6-A75 exam covers a range of topics that are essential for managing Aruba wireless networks. This includes configuring and troubleshooting Aruba access points, controllers, and mobility masters. Additionally, the exam tests the candidate’s knowledge in implementing advanced security features, such as role-based access control and firewall policies, to protect the network from unauthorized access.

HPE6-A75 exam covers a wide range of topics related to wireless networking, such as configuring and troubleshooting Aruba wireless networks, working with access points and controllers, and implementing security measures to protect wireless networks from unauthorized access. HPE6-A75 exam also evaluates the candidate’s ability to manage and optimize network performance, as well as their knowledge of industry-standard wireless technologies.

QUESTION 20
Which situation requires an AOS-Switch interface to support MAC-based VLANs?

The interface has an extended MAC ACL applied to it in the outbound direction, and it uses VLAN ID as one of the criteria for rules.

The interface has an extended MAC ACL applied to it in the inbound direction, and it has multiple tagged VLAN assignments.

The interface is configured to support Local MAC Authentication (LMA), authenticates endpoints against a non-default MAC group, and limits the address count to 1.

The interface is configured to support 802.1X in user-based mode, connects to more than one endpoint at a time, and users are assigned to different dynamic VLANs.

QUESTION 21
What is a typical reason to implement MAC authentication on an AOS-Switch?

to filter traffic at the edge, based on multiple criteria in the MAC header

to provision switch ports to support devices such as IP phones or printers

to enhance the security of an 802.1X solution

to control management access to the switch CLI based on device, as well as user credentials

QUESTION 22
Refer to the exhibit.

An employee connects a corporate laptop to the network and authenticates for the first time using EAP-TLS. Based on the Enforcement Policy configuration shown, which Enforcement Profile wilt be sent?

Deny Access Profile

Onboard Post-Provisioning – Aruba

Onboard Device Repository

Onboard Pre-Provisioning – Aruba

QUESTION 23
An administrator implements the MultiZone feature and uses two clusters that utilize CPSec. A primary and a data zone are created. MultiZone APs successfully build sessions to the primary cluster but fail to establish sessions to the data zone cluster. What must the administrator do to solve this problem?

Enable CPSec in the MultiZone profile for both the primary and data zone.

Enable MultiZone booting in the MultiZone AP apboot configuration mode.

Add the MultiZone APs to the data zone’s CPSec whitelist.

Use different AP Group names for the two zones.

QUESTION 24
A company requires AOS-Switches at the campus core. The switches:
Will act as the default gateways for several campus VLANs Must provide redundancy for their services and tolerate the loss of a link or an entire switch Must recover from the failure of one of the switches within a second or less VRRP and MSTP are proposed to meet these requirements. What is an issue with this proposal?

VRRP provides redundancy against lost links but not a failed switch.

VRRP provides routing redundancy but not default gateway redundancy.

VRRP does not interoperate with MSTP.

VRRP takes longer than a second to fail over.

QUESTION 25
Refer to the exhibit.

Based on the configuration of the Enforcement Profiles In the Onboard Authorization service shown, which Onboarding action will occur?

The device will be disconnected from the network after Onboarding so that an EAP-TLS authentication is not performed.

The device will be disconnected from and reconnected to the network after Onboarding is completed.

The device’s onboard authorization request will be denied.

The device will be disconnected after post-Onboarding EAP-TLS authentication, so a second EAP-TLS authentication is performed.

After logging in on the Onboard web login page, the device will be disconnected form and reconnected to the network before Onboard begins.

QUESTION 26
Refer to the exhibit.

A company has attempted to implement OSPF without success. The devices in Area I need to be able to reach Area 2. Routes should be aggregated for advertisement in other areas. What must be changed to meet these requirements?

Change Area 3 to Area 0; remove Area 1 from Switch-2 and Area 2 from Switch-1.

Add the 10.2.0.0/16 range on Swttch-1 and the 10.1.0.0/16 range on Switch-2.

Add Area 1 and Area 2 on VIAN 100 on both Switch-1 and Switch-2. Remove Area 3.

Move the 10.1.0.0/16 range to Area 2 on Switch-1 and the 10.2.0.0/16rangetoArea 1 onSwitch-2.

QUESTION 27
Refer to the exhibit.

A known unicast packet is received from Switch-1 on the standby and must be forwarded to Switch-2. How does the VSF fabric decide which port in the aggregated (ink should forward the packet?

The standby uses its own port in the link aggregation to forward the fabric.

The standby sends the packet to the commander over a VSF link, and the commander decides the correct port.

The standby uses the typical load sharing algorithm, and it might select either its port or the commander’s port.

The standby selects the port on the designated forwarder for the aggregation.

QUESTION 28
Refer to the exhibit.

Based on the configuration of the Enforcement Profiles In the Onboard Authorization service shown, which Onboarding action will occur?

The device will be disconnected from the network after Onboarding so that an EAP-TLS authentication is not performed.

The device will be disconnected from and reconnected to the network after Onboarding is completed.

The device’s onboard authorization request will be denied.

The device will be disconnected after post-Onboarding EAP-TLS authentication, so a second EAP- TLS authentication is performed.

After logging in on the Onboard web login page, the device will be disconnected form and reconnected to the network before Onboard begins.

QUESTION 29
Refer to the exhibit.

Controllers are configured m a cluster as shown in the exhibit. These are the network details.
* A Mobility Master (MM) manages the cluster.
* The cluster contains two controllers: C l and C2.
* API and AP2 use CI as their Active AP Anchor Controller (A-AAC). with C2 as their Standby AAC (S-AAC).
* AP3 and AP4 use C2 as their A-AAC, with CI as their S-AAC.
User1 establishes a wireless connection via API, where the Active User Anchor Controller (A-UAC) assigned is CI. with C2 as the standby. What happens when User I roams the wireless network and eventually their session is handled by AP3?

The AP3’s A-AAC switches to C1, and the user’s A-UAC remains on C1.

The AP3’s A-AAC switches to C2, and the user’s A-UAC remains on C2.

The AP3’s A-AAC switches to C1, and the user’s A-UAC remains on C2.

The AP3’s A-AAC switches to C2, and the user’s A-UAC remains on C1.

QUESTION 30
Which ArubaOS CLl command can an administrator execute to determine if AP load balancing is enabled in a cluster?

show switches

show lc-cluster group-membership

show aaa cluster essid

show ap active

QUESTION 31
Which solution allows administrators to monitor link status and port utilization on AOS-Switches from a centralized location?

Aruba Mobility Controller

Aruba AirWave

Aruba Mobility Manager

Aruba ClearPass

QUESTION 32
What is a primary use case for RPVST+ on AOS-Switches?

more granular load balancing than MSTP when access switches connect to two core switches

enhanced loop protection in an MSTP network

integration of AOS-Switches in a heterogeneous vendor network that uses the Cisco protocol

seamless integration with RSTP

QUESTION 33
The security plan for AOS-Switches calls for ARP protection. For ARP protection to function properly, which other feature should also be implemented?

MAC lockout

proxy ARP

DHCP snooping

connection-rate filtering

QUESTION 34
An administrator wants to use Airwave to manually add devices on the network. Where should the administrator perform this action?

in Device Setup

in Groups

in AMP Setup

in Devices

QUESTION 35
Refer to the exhibit.

An administrator implements AP licensing on a Mobility Master (MM).
– Each campus is responsible to purchase its own AP licenses.
– There are 900 AP licenses deployed in the global pool.
– There are three dedicated pools.
– From the global pool, 300 AP licenses are assigned to each dedicated
pool.
Network engineers at CampusA want to deploy an additional 100 APs. Currently all of the AP licenses in CampusA and CampusB are allocated, but only 200 of the AP licenses in CampusC are allocated.
What can the administrator do to add capacity for CampusA in alignment with campus policies?

Allow CampusA to share from the CampusC pool.

Add 100 more AP licenses and assign them to the CampusA pool.

Move 100 licenses from the CampusC pool to the global pool.

Add 100 more AP licenses to the global pool.

Each campus is responsive to purchase its own AP licenses.
You could not take licenses from CampusC.

QUESTION 36
A company has AOS-Switches, Aruba ClearPass, and Aruba Airwave. A network administrator needs to set up a new switch with the same settings found on other switches in the company. Which action rs likely to be the most useful to perform the task?

Access the Network Device view on ClearPass.

Use the configuration audit tool on AirWave.

View the current running config on each switch.

View usage patterns on the switches on AirWave.

Loading …