[Q22-Q43] Updated Nov-2023 Test Engine to Practice Test for HPE6-A75 Exam Questions and Answers!

Rate this post

Updated Nov-2023 Test Engine to Practice Test for HPE6-A75 Exam Questions and Answers!

Aruba Certified Edge Professional Exam Certification Sample Questions and Practice Exam

HP HPE6-A75 (Aruba Certified Edge Professional) Certification Exam is an excellent opportunity for network professionals to validate their skills and knowledge in Aruba’s network technologies. Aruba Certified Edge Professional Exam certification demonstrates the candidate’s proficiency in designing, implementing, and troubleshooting complex network infrastructures using Aruba’s technologies. Aruba Certified Edge Professional Exam certification is also highly valued by employers, making it an excellent career advancement opportunity for networking professionals.

HPE6-A75 exam is targeted at network professionals who have experience working with Aruba’s network infrastructure or have completed the Aruba Certified Switching Associate (ACSA) certification. HPE6-A75 exam is also suitable for professionals who are looking to enhance their skills and knowledge in Aruba’s network technologies and want to demonstrate their proficiency to employers.

NEW QUESTION 22
A customer wants to implement Virtual IP redundancy, such that in case of a ClearPass server outage, 802.1x authentications will not be interrupted. The administrator has enabled a single Virtual IP address on two ClearPass servers.
Which statements accurately describe next steps? (Select two.)

The NAD should be configured with the primary node IP address for RADIUS authentication on the 802.1x network.

A new Virtual IP address should be created for each NAD.

Both the primary and secondary nodes will respond to authentication requests sent to the Virtual IP address when the primary node is active.

The primary node will respond to authentication requests sent to the Virtual IP address when the primary node is active.

The NAD should be configured with the Virtual IP address for RADIUS authentications on the
802.1x network.

NEW QUESTION 23
Which technologies can prevent split brain in a VSF fabric that includes Aruba 2930F switches?

ARP MAD or OOBM MAD

VLAN MAD or ARP MAD

OOBM MAD or LLDP MAD

LLDP MAD or VLAN MAD

NEW QUESTION 24
Refer to the exhibit.

Controllers are configured m a cluster as shown in the exhibit. These are the network details.
– A Mobility Master (MM) manages the cluster.
– The cluster contains two controllers: Cl and C2.
– API and AP2 use C1 as their Active AP Anchor Controller (A-AAC) with
C2 as their Standby AAC (S-AAC).
– AP3 and AP4 use C2 as their A-AAC, with C1 as their S-AAC.
User1 establishes a wireless connection via API, where the Active User Anchor Controller (A- UAC) assigned is C1, with C2 as the standby. What happens when User1 roams the wireless network and eventually their session is handled by AP3?

The AP3’s A-AAC switches to C1, and the user’s A-UAC remains on C1.

The AP3’s A-AAC switches to C2, and the user’s A-UAC remains on C2.

The AP3’s A-AAC switches to C1, and the user’s A-UAC remains on C2.

The AP3’s A-AAC switches to C2, and the user’s A-UAC remains on C1.

NEW QUESTION 25
Refer to the exhibit.

Based on the Policy configuration shown, which VLAN will be assigned when a user with ClearPass role Engineer authenticates to the network successfully on Saturday using connection protocol WEBAUTH?

Deny Access

Employee VLAN

Internet VLAN

Full Access VLAN

NEW QUESTION 26
A company has AOS-Switches deployed at sites with inexperienced IT staff. The main office network administrators want to track if configurations change on branch switches. What should be set up for this purpose?

an SNMP trap

an RMON alarm

an auto-config server

an lP SLA profile

NEW QUESTION 27
Which ArubaOS CLl command can an administrator execute to determine if AP load balancing is enabled in a cluster?

show switches

show lc-cluster group-membership

show aaa cluster essid

show ap active

NEW QUESTION 28
Which situation requires an AOS-Switch interface to support MAC-based VLANs?

The interface has an extended MAC ACL applied to it in the outbound direction, and it uses VLAN ID as one of the criteria for rules.

The interface has an extended MAC ACL applied to it in the inbound direction, and it has multiple tagged VLAN assignments.

The interface is configured to support Local MAC Authentication (LMA), authenticates endpoints against a non-default MAC group, and limits the address count to 1.

The interface is configured to support 802.1X in user-based mode, connects to more than one endpoint at a time, and users are assigned to different dynamic VLANs.

NEW QUESTION 29
Refer to the exhibit. Several interfaces on an AOS-Switch enforce 802. IX to a RADIUS server at
10.254.378.521. The interface 802. IX settings are shown in the exhibit, and 802. IX is also enabled globally. The security team have added a requirement tor port security on the interfaces as well. Before administrators enable port security, which additional step must they complete to prevent issues?

Set an 802. l X client limit on the interfaces.

Manually add legitimate MAC addresses to the switch authorized MAC list.

Enable eavesdropping protection on the interfaces.

Enable DHCP snooping on VLAN 20.

NEW QUESTION 30
Refer to the exhibit.

Based on the Enforcement Policy configuration, when a user with Role Engineer connects to the network and the posture token assigned is Unknown, which Enforcement Profile will be applied?

EMPLOYEE_VLAN

RestrictedACL

Deny Access Profile

HR VLAN

Remote Employee ACL

NEW QUESTION 31
Refer to the exhibit.

Based on the Attribute configuration shown, which statement accurately describes the status of attribute values?

Only the attribute values of department and memberOf can be used in role mapping policies.

The attribute values of department, title, memberOf, telephoneNumber, and mail are directly applied as ClearPass.

Only the attribute value of company can be used in role mapping policies, not the other attributes.

The attribute values of department and memberOf are directly applied as ClearPass roles.

Only the attribute values of title, telephoneNumber, and mail can be used in role mapping policies.

NEW QUESTION 32
The administrator expects the AP to connect to a cluster, but the AP tails to connect. The administrator examines the configuration of an AP from apboot mode shown in the exhibit.
What can the administrator determine about the configuration of the AP?

The AP is configured to terminate on a non-cluster Mobility Controller.

The AP is configured as a RAP to terminate on a stand-alone controller.

The AP is configured as a RAP to terminate on a Mobility Master.

The AP is configured to terminate on a Mobility Controller in a cluster.

NEW QUESTION 33
Refer to the exhibit.

Based on the Enforcement Policy configuration, when a user with Role Engineer connects to the network and the posture token assigned is Unknown, which Enforcement Profile will be applied?

EMPLOYEE_VLAN

RestrictedACL

Deny Access Profile

HR VLAN

Remote Employee ACL

NEW QUESTION 34
Refer to the exhibit.

Based on the configuration of the Enforcement Profiles In the Onboard Authorization service shown, which Onboarding action will occur?

The device will be disconnected from the network after Onboarding so that an EAP-TLS authentication is not performed.

The device will be disconnected from and reconnected to the network after Onboarding is completed.

The device’s onboard authorization request will be denied.

The device will be disconnected after post-Onboarding EAP-TLS authentication, so a second EAP- TLS authentication is performed.

After logging in on the Onboard web login page, the device will be disconnected form and reconnected to the network before Onboard begins.

NEW QUESTION 35
An administrator creates service-based policies for AirGroup on the Mobility Master (MM). The administrator can define location-based policy limits based on which information?

AP names, AP groups, controller names, and controller groups

AP Fully Qualified Location Names (FQLNs) and controller Fully Qualified Domain Names (FQDNs)

AP names, AP groups, and AP Fully Qualified Location Names (FQLNs)

Controller names, controller groups, and controller Fully Qualified Domain Names (FQDNs)

NEW QUESTION 36
Refer to the exhibit.

Traffic between the servers m Area l takes a less optimal path rather than the link associated with VLAN l OOO, subnet 10.0.0.0/30. Based on the exhibits, why is this the case?

The metric on the VLAN 1000 interface is too low.

Switch-1 and Switch-2 cannot achieve adjacency on VLAN 1000 due to mismatches.

OSPF routing switches choose the best intra-area routes based on Area 1 links only.

The link between Switch-1 and Switch-2 has gone down.

NEW QUESTION 37
Refer to the exhibit.

The network administrator wants to reduce failover time If a switch link m VIAN 100 goes down. What should the administrator do?

Configure echo mode BFD on VLAN 100 on all OSPF routing devices on VLAN 100.

Lower the dead timer on the BDR of VLAN 100.

Lower the hello timer only on the BDR of VLAN 100.

Configure graceful restart on all of the OSPF routing devices on VLAN 100.

NEW QUESTION 38
The security plan for AOS-Switches calls for ARP protection. For ARP protection to function properly, which other feature should also be implemented?

MAC lockout

proxy ARP

DHCP snooping

connection-rate filtering

NEW QUESTION 39
The administrator expects the AP to connect to a cluster, but the AP tails to connect. The administrator examines the configuration of an AP from apboot mode shown in the exhibit. What can the administrator determine about the configuration of the AP?

The AP is configured to terminate on a non-cluster Mobility Controller.

The AP is configured as a RAP to terminate on a stand-alone controller.

The AP is configured as a RAP to terminate on a Mobility Master.

The AP is configured to terminate on a Mobility Controller in a cluster.

NEW QUESTION 40
Refer to the exhibit.

Which statements accurately describe the status of the Onboarded devices in the configuration tor the network settings shown? (Select two.)

They will connect to Employee_Secure SSID after provisioning.

They will connect to Employee_Secure SSID for provisioning their devices.

They will use WPA2-PSK with AES when connecting to the SSID.

They will connect to secure_emp SSID after provisioning.

They will perform 802.1X authentication when connecting to the SSID.

NEW QUESTION 41
Refer to the exhibit.

The network administrator needs to set up BGP between the two company switches. Switch-1 and Switch-2. The BGP connection does not establish. Based on the exhibits, what does the administrator need to do to fix the issue?

Enable the multihop option for the neighbor on each of the switches.

Enter the network command for 10.0.0.0/24 in the router BGP mode on each switch.

Enable BGP on the interfaces that the switches use to reach each other.

Set the update source for the neighbor to the local loopback interface on each switch.

NEW QUESTION 42
A university wants to deploy ClearPass with the Guest module. They have two types of users that need to use web login authentication. The first type of users are students whose accounts are in an Active Directory server. The second type of users are friends of students who need to self-register to access the network.
How should the service be setup in the Policy Manager for this Network?

Guest User Repository as the authentication source, and Guest User Repository and Active Directory server as authorization sources

Active Directory server as the authentication source, and Guest User Repository as the authorization source

Guest User Repository as the authentication source and the Active Directory server as the authorization source

Guest User Repository and Active Directory server both as authentication sources

Either the Guest User Repository or Active Directory server should be the single authentication source

NEW QUESTION 43
Refer to the exhibit.

Controllers are configured m a cluster as shown in the exhibit. These are the network details.
* A Mobility Master (MM) manages the cluster.
* The cluster contains two controllers: C l and C2.
* API and AP2 use CI as their Active AP Anchor Controller (A-AAC). with C2 as their Standby AAC (S-AAC).
* AP3 and AP4 use C2 as their A-AAC, with CI as their S-AAC.
User1 establishes a wireless connection via API, where the Active User Anchor Controller (A-UAC) assigned is CI. with C2 as the standby. What happens when User I roams the wireless network and eventually their session is handled by AP3?