Pass Exam Questions Efficiently With C-TS411-2022 Questions (2024) [Q18-Q39]

Rate this post

Pass Exam Questions Efficiently With C-TS411-2022 Questions (2024)

C-TS411-2022 Questions – Truly Beneficial For Your SAP Exam

NO.18 Why do you use the Restrictions tab in a characteristic?

To control the authorization groups for the characteristic

To control the authorizations for the characteristic

To restrict the assignment of characteristics to the classes you enter

To restrict the assignment of characteristics to classes of the class types you enter

NO.19 Where can you create routings?Note: There are 3 correct Answers to this question.

In Product Structure Synchronization

In Visual Manufacturing Planner

In the classic transaction or corresponding Fiori app for the creation of routings (CA01)

In the classic transaction or corresponding Fiori app for Variant Configuration Modeling Environment (PMEVC)

In the classic transaction or corresponding Fiori app for the Engineering Workbench (CEWB)

NO.20 A procedure sets the value V2 for characteristic C2 when the value V1 is set for characteristic C1.How do you assign and define this procedure?Note: There are 3 correct Answers to this question.

Procedure to characteristic C1 using the following syntax: $self.C2 = ‘V2’ if $self.C1 = ‘V1’ (not recommended)

Procedure to characteristic C2 using the following syntax: $self.C1 = ‘V1’ if $self.C2 = ‘V2’ (not recommended)

Procedure with the following syntax to the configuration profile: $self.C2 = ‘V2’ if $self.C1 = ‘V1’ (recommended)

Procedure to the value V2 with the following syntax: $self.C1 = ‘V1’ (not recommended)

Procedure to the value V1 with the following syntax: $self.C2 = ‘V2’ (not recommended)

NO.21 Which are the settings for material variant determination that are also made in customizing for the item categories for the sales document?Note: There are 3 correct Answers to this question.

Set actions for material variants

Setting BOM determination (link or individual)

Activate the variant matching

Availability check/ATP material variant

Setting routing determination (link or individual)

NO.22 What is the significance of the Additional Data tab in class maintenance?

It only exists for class nodes. It controls the usage in BOMs.

It exists for all class types. It controls the permitted object types.

It only exists for class nodes. It controls the usage in routings.

It only exists for variant classes. It controls the use in configuration profiles.

NO.23 Which configuration processes/scenarios are supported for both processing modes?

Plan./Production Order, Sales Order (SET) only

Plan./Production Order, Order BOM, Sales Order (SET)

Sales Order (SET), Order BOM only

Plan./Production Order, Order BOM only

NO.24 The processing mode is set in the configuration profile and in the object dependencies. What needs to be taken into account?Note: There are 3 correct Answers to this question.

The processing mode of object dependencies assigned to BOM and routing must always be “Classic” (independent of the configuration profile).

The processing mode of object dependencies assigned to characteristics and characteristic values must be the same as that of the configuration profile.

The processing mode of dependencies assigned to characteristics and characteristic values must always be “Advanced Variant Configuration” (independent of the configuration profile).

The processing mode of object dependencies assigned to the configuration profile must be the same as that of the configuration profile.

The processing mode of object dependencies assigned to BOM and routing must be the same as that of the configuration profile.

NO.25 What do you have to keep in mind when working with value hierarchies?Note: There are 2 correct Answers to this question.

Value nodes are values.

Only available for characteristics with CHAR or NUM format.

Value nodes are not values.

Only available for characteristics with CHAR format.

NO.26 Why do you need a material BOM header status?

It controls the usage of the material BOM inside logistic chain.

It controls the usage of the material BOM items inside logistic chain.

It controls the usage of an assembly indicator inside material BOM.

It controls the usage of the material BOM by a certain user.

NO.27 You work with cross-plant and plant-specific Product Master statuses. Which status has the highest priority?

The cross-plant status.

The most restrictive status.

The plant-plant specific status.

The least restrictive status.

NO.28 You can use the syntax element $set_pricing_factor for pricing in object dependencies.What do you need to consider?Note: There are 2 correct Answers to this question.

Negative factors must not be used in $set_pricing_factor.

$set_pricing_factor sets the variant condition and adds a factor to it. The variant condition must not already be assigned.

You cannot use zero as a factor in $set_pricing_factor.

$set_pricing_factor adds only one factor. The variant condition must already be assigned.

NO.29 What is a clear indicator of having local object dependencies?

Name

Syntax

Administrative data

Status

NO.30 Which item category is only available in configurable BOMs?

Class item (K)

Non-stock item (N)

Variable-size item (R)

Document item (D)

NO.31 You can assign material components to operations.What needs to be taken into account?

You can only assign material components that have also been assigned to the routing as production resources and tools.

You can only assign material components that were previously assigned to the header material.

You can only assign material components that are components of a material BOM.

You can only assign each material component, when the material master exists and is known in the plant.

NO.32 You activate the check for same classification inside basic data screen of your class. Which restrictions are available?
Note: There are 2 correct Answers to this question.

The classification is only checked for objects connected to several classes.

The classification is only checked when you have assigned values to all characteristics.

The classification is only checked when you have assigned values to some characteristics.

The classification is only checked for objects connected to one class.

NO.33 Which data base tables use the Product Master?

Tables for Master Data Management.

Tables only for Product Master.

Tables only for Material Master.

Tables for Product Master and Material Master.

NO.34 What do you have to keep in mind when copying a group BOM to a plant specific BOM?Note: There are
2 correct Answers to this question.

The internal BOM number stays unchanged.

The material component must have a plant assignment.

The header status has to be active.

The BOM usage can be changed.

NO.35 What objects can be changed with a change number? Note: There are 2 correct Answers to this question.

Bills of Material

Cost Centers

Work Centers

Task Lists

NO.36 What happens if the characteristic status is not set to Released?

The characteristic can only be changed.

The characteristic cannot be assigned to a class.

A value of this characteristic cannot be assigned in configuration.

A value of this characteristic cannot be assigned in classification of a configurable material.

NO.37 There are item categories that are only allowed in configurable BOMs.What do you have to keep in mind when working with configurable routings?Note: There are 3 correct Answers to this question.

Equipment as production resources/tools may only be used in configurable routings.

All types of operation can be used in non-configurable and configurable routings.

All sequence categories can be used in non-configurable and configurable routings.

All production resources/tools catgories can be used in non-configurable and configurable routings.

Alternative sequences may only be used in configurable routings.

NO.38 What kind of reports does the classification area offer?Note: There are 3 correct Answers to this question.

Characteristics list

Summarized class explosion

Object list

Classification status

Class status

NO.39 Which prerequisites must be fulfilled before a configuration profile can be created and released for a configurable material?

At least one variant class must be assigned to the configurable material. Values must be assigned to the characteristics here.

At least one variant class must be assigned to the configurable material.

At least one variant class must be assigned to the configurable material. Values must not be assigned to the characteristics here.

Exactly one variant class must be assigned to the configurable material.

Truly Beneficial For Your SAP Exam: https://www.examstorrent.com/C-TS411-2022-exam-dumps-torrent.html

Pass Exam Questions Efficiently With C-TS411-2022 Questions (2024) [Q18-Q39]

admin

Leave a Reply Cancel reply

admin

You May Also Like

Leave a Reply Cancel reply