[Sep 24, 2025] Step by Step Guide to Prepare for NSE8_812 Exam BrainDumps [Q49-Q64]

Rate this post

Sep 24, 2025 Step by Step Guide to Prepare for NSE8_812 Exam BrainDumps

Fortinet Network Security Expert NSE8_812 Real Exam Questions and Answers FREE Updated on 2025

The NSE8_812 exam covers a wide range of topics, including network security design, implementation, and management, advanced threat protection, and network security analysis. NSE8_812 exam is conducted in a proctored environment, and candidates are required to answer 60 multiple-choice questions in 120 minutes. The questions are designed to test the candidate’s ability to apply their knowledge to real-world scenarios and identify and mitigate security threats in complex network environments.

Fortinet NSE8_812, also known as Fortinet NSE 8 – Written Exam, is a certification exam offered by Fortinet that validates the candidate’s knowledge and skills in designing, implementing, and managing complex security solutions using Fortinet products. NSE8_812 exam is designed for experienced professionals who have already earned Fortinet NSE 7 certification and have a deep understanding of the Fortinet Security Fabric and related technologies.

Q49. Review the following FortiGate-6000 configuration excerpt:

Based on the configuration, which statement is correct regarding SNAT source port partitioning behavior?

It dynamically distributes SNAT source ports to operating FPCs or FPMs.

It is the default SNAT configuration and preserves active sessions when an FPC or FPM goes down.

It statically distributes SNAT source ports to operating FPCs or FPMs

It equally distributes SNAT source ports across chassis slots.

Q50. Refer to the exhibits, which show a firewall policy configuration and a network topology.

An administrator has configured an inbound SSL inspection profile on a FortiGate device (FG-1) that is protecting a data center hosting multiple web pages-Given the scenario shown in the exhibits, which certificate will FortiGate use to handle requests to xyz.com?

FortiGate will fall-back to the default Fortinet_CA_SSL certificate.

FortiGate will reject the connection since no certificate is defined.

FortiGate will use the Fortinet_CA_Untrusted certificate for the untrusted connection,

FortiGate will use the first certificate in the server-cert list-the abc.com certificate

Q51. Refer to the exhibit containing the configuration snippets from the FortiGate. Customer requirements:

* SSLVPN Portal must be accessible on standard HTTPS port (TCP/443)
* Public IP address (129.11.1.100) is assigned to portl
* Datacenter.acmecorp.com resolves to the public IP address assigned to portl The customer has a Let’s Encrypt certificate that is going to expire soon and it reports that subsequent attempts to renew that certificate are failing.
Reviewing the requirement and the exhibit, which configuration change below will resolve this issue?

Q52. A remote worker requests access to an SSH server inside the network. You deployed a ZTNA Rule to their FortiClient. You need to follow the security requirements to inspect this traffic.
Which two statements are true regarding the requirements? (Choose two.)

FortiGate can perform SSH access proxy host-key validation.

You need to configure a FortiClient SSL-VPN tunnel to inspect the SSH traffic.

SSH traffic is tunneled between the client and the access proxy over HTTPS

Traffic is discarded as ZTNA does not support SSH connection rules

Q53. You want to use the MTA adapter feature on FortiSandbox in an HA-Cluster. Which statement about this solution is true?

The configuration of the MTA Adapter Local Interface is different than on port1.

The MTA adapter is only available in the primary node.

The MTA adapter mode is only detection mode.

The configuration is different than on a standalone device.

Q54. A customer wants to use the FortiAuthenticator REST API to retrieve an SSO group called SalesGroup. The following API call is being made with the ‘curl’ utility:

Which two statements correctly describe the expected behavior of the FortiAuthenticator REST API? (Choose two.)

Only users with the “Full permission” role can access the REST API

This API call will fail because it requires that API version 2

If the REST API web service access key is lost, it cannot be retrieved and must be changed.

The syntax is incorrect because the API calls needs the get method.

Q55. Review the Application Control log.

Which configuration caused the IPS engine to generate this log?

Q56. You deployed a fully loaded FG-7121F in the data center and enabled sslvpn-load-balance. Based on the behavior of this feature which statement is correct?

You can use src-ip or dst-ip-dport on dp-load-distribution-method to make SSL VPN load balancing work as expected.

If an FPM goes down, SSL VPN IP pool IP addresses will be re-allocated to the remaining FPMs.

To have better traffic distribution you should use IP pools that increment in multiples of 12.

Enabling SSL VPN load balancing will clear the session table.

Q57. Refer to the exhibits.

An administrator has configured a FortiGate and Forti Authenticator for two-factor authentication with FortiToken push notifications for their SSL VPN login. Upon initial review of the setup, the administrator has discovered that the customers can manually type in their two-factor code and authenticate but push notifications do not work Based on the information given in the exhibits, what must be done to fix this?

On FG-1 port1, the ftm access protocol must be enabled.

FAC-1 must have an internet routable IP address for push notifications.

On FG-1 CLI, the ftm-push server setting must point to 100.64.141.

On FAC-1, the FortiToken public IP setting must point to 100.64.1 41

Q58. You must configure an environment with dual-homed servers connected to a pair of FortiSwitch units using an MCLAG.
Multicast traffic is expected in this environment, and you should ensure unnecessary traffic is pruned from links that do not have a multicast listener.
In which two ways must you configure the igmps-f lood-traffic and igmps-flood-report settings? (Choose two.)

disable on ICL trunks

enable on ICL trunks

disable on the ISL and FortiLink trunks

enable on the ISL and FortiLink trunks

Q59. Refer to the exhibit.

You have been tasked with replacing the managed switch Forti Switch 2 shown in the topology.
Which two actions are correct regarding the replacement process? (Choose two.)

After replacing the FortiSwitch unit, the automatically created trunk name does not change

CLAG-ICL needs to be manually reconfigured once the new switch is connected to the FortiGate

After replacing the FortiSwitch unit, the automatically created trunk name changes.

MCLAG-ICL will be automatically reconfigured once the new switch is connected to the FortiGate.

Q60. A Hub FortiGate is connecting multiple branch FortiGate devices separating the traffic centrally in unique VRFs. Routing information is exchanged using BGP between the Hub and the Branch FortiGate devices.
You want to efficiently enable route leaking of specific routes between the VRFs.
Which two steps are required to achieve this requirement? (Choose two.)

Create a vdom link between VRF10 and VRF12

Enable BGP recursive routing on the HUB FortiGate

Enable Multi-VDOM mode on the Hub FortiGate and add a VDOM to connect VRF10 and VRF12

Configure route-maps to leak the selected routes using BGP

Q61. You are creating the CLI script to be used on a new SD-WAN deployment You will have branches with a different number of internet connections and want to be sure there is no need to change the Performance SLA configuration in case more connections are added to the branch.
The current configuration is:

Which configuration do you use for the Performance SLA members?

set members any

set members 0

current configuration already fulfills the requirement

set members all

Q62. A remote IT Team is in the process of deploying a FortiGate in their lab. The closed environment has been configured to support zero-touch provisioning from the FortiManager, on the same network, via DHCP options. After waiting 15 minutes, they are reporting that the FortiGate received an IP address, but the zero-touch process failed.
The exhibit below shows what the IT Team provided while troubleshooting this issue:

Which statement explains why the FortiGate did not install its configuration from the FortiManager?

The FortiGate was not configured with the correct pre-shared key to connect to the FortiManager

The DHCP server was not configured with the FQDN of the FortiManager

The DHCP server used the incorrect option type for the FortiManager IP address.

The configuration was modified on the FortiGate prior to connecting to the FortiManager

Q63. Refer to the exhibits.

A customer wants to deploy 12 FortiAP 431F devices on high density conference center, but they do not currently have any PoE switches to connect them to. They want to be able to run them at full power while having network redundancy From the FortiSwitch models and sample retail prices shown in the exhibit, which build of materials would have the lowest cost, while fulfilling the customer’s requirements?

1x FortiSwitch 248EFPOE

2x FortiSwitch 224E-POE

2x FortiSwitch 248E-FPOE

2x FortiSwitch 124E-FPOE

The customer wants to deploy 12 FortiAP 431F devices on a high density conference center, but they do not have any PoE switches to connect them to. They want to be able to run them at full power while having network redundancy. PoE switches are switches that can provide both data and power to connected devices over Ethernet cables, eliminating the need for separate power adapters or outlets. PoE switches are useful for deploying devices such as wireless access points, IP cameras, and VoIP phones in locations where power outlets are scarce or inconvenient. The FortiAP 431F is a wireless access point that supports PoE+ (IEEE 802.3at) standard, which can deliver up to 30W of power per port. The FortiAP 431F has a maximum power consumption of 25W when running at full power. Therefore, to run 12 FortiAP 431F devices at full power, the customer needs PoE switches that can provide at least 300W of total PoE power budget (25W x 12). The customer also needs network redundancy, which means that they need at least two PoE switches to connect the FortiAP devices in case one switch fails or loses power. From the FortiSwitch models and sample retail prices shown in the exhibit, the build of materials that has the lowest cost while fulfilling the customer’s requirements is 2x FortiSwitch 248E-FPOE. The FortiSwitch 248E-FPOE is a PoE switch that has 48 GE ports with PoE+ capability and a total PoE power budget of 370W. It also has 4x 10 GE SFP+ uplink ports for high-speed connectivity. The sample retail price of the FortiSwitch 248E-FPOE is $1,995, which means that two units will cost $3,990. This is the lowest cost among the other options that can meet the customer’s requirements. Option A is incorrect because the FortiSwitch 248EFPOE is a non-PoE switch that has no PoE capability or power budget. It cannot provide power to the FortiAP devices over Ethernet cables. Option B is incorrect because the FortiSwitch 224E-POE is a PoE switch that has only 24 GE ports with PoE+ capability and a total PoE power budget of 185W. It cannot provide enough ports or power to run 12 FortiAP devices at full power. Option D is incorrect because the FortiSwitch 124E-FPOE is a PoE switch that has only 24 GE ports with PoE+ capability and a total PoE power budget of 185W. It cannot provide enough ports or power to run 12 FortiAP devices at full power. Reference: https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/FortiSwitch_Secure_Access_Series.pdf https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/FortiAP_400_Series.pdf

Q64. Refer to the exhibit showing an SD-WAN configuration.

According to the exhibit, if an internal user pings 10.1.100.2 and 10.1.100.22 from subnet 172.16.205.0/24, which outgoing interfaces will be used?

port16 and port1

port1 and port1

port16 and port15

port1 and port15

Ultimate Guide to Prepare NSE8_812 Certification Exam for Fortinet Network Security Expert: https://www.examstorrent.com/NSE8_812-exam-dumps-torrent.html

admin

You May Also Like

Leave a Reply Cancel reply