Use D-VXR-DS-00 Exam Dumps (2026 PDF Dumps) To Have Reliable D-VXR-DS-00 Test Engine [Q63-Q87]

Posted byadminMay 17, 2026Leave a Comment on Use D-VXR-DS-00 Exam Dumps (2026 PDF Dumps) To Have Reliable D-VXR-DS-00 Test Engine [Q63-Q87]

Rate this post

Use D-VXR-DS-00 Exam Dumps (2026 PDF Dumps) To Have Reliable D-VXR-DS-00 Test Engine

D-VXR-DS-00 PDF Recently Updated Questions Dumps to Improve Exam Score

NO.63 Which tool is used to create a solution summary for VxRail deployments?
Response:

VMware vCenter

VxRail Manager

Live Optics

VxRail Sizing Tool

NO.64 What is the recommended network configuration for a VxRail Dynamic Node cluster?
Response:

Dedicated storage VLANs

Dual-switch network topology

Fibre Channel connectivity for storage

High-speed Ethernet with multiple uplinks

NO.65 What impact does enabling deduplication and compression have on a VxRail cluster?
Response:

Reduces disk performance

Increases storage efficiency

Reduces CPU utilization

Requires additional networking resources

NO.66 Which components are typically part of a VxRail cluster design?
(Choose two)
Response:

Management switch

Witness node

Hypervisor license

Fibre Channel adapter

NO.67 What resource should be used to determine power and rack space requirements?

Enterprise Infrastructure Planning Tool

Live Optics

Site Planning Guide

Support Matrix

The Site Planning Guide provides detailed information on power and rack space requirements to ensure proper physical infrastructure planning for VxRail deployments.

NO.68 What are the benefits of running configuration validation in VxRail Manager?
(Choose two)
Response:

Ensures compatibility with external storage systems

Detects hardware inconsistencies

Resolves IP conflicts in advance

Prepares vSAN for deployment

NO.69 When planning for a VxRail 2-node cluster, which two separate networks are required to be configured for vSAN witness virtual appliance? (Choose two.)

Management network

VxRail network

vCenter network

vSAN witness network

The vSAN witness virtual appliance requires connectivity to the Management network for administrative access and the dedicated vSAN witness network to handle witness traffic for cluster quorum.

NO.70 What is a key consideration when configuring VLANs for VxRail management traffic?
Response:

VLANs must support dynamic trunking.

VLANs should be segregated from workload traffic.

VLANs must use Fibre Channel-based routing.

VLANs require witness node integration.

NO.71 What is the purpose of using a vSphere Distributed Switch during a VxRail deployment?
Response:

Enables snapshot recovery

Simplifies traffic management across clusters

Allocates node resources

Configures data deduplication

NO.72 What is a key consideration when selecting nodes for a high-availability VxRail cluster?
Response:

Redundant network interfaces

High-density storage drives

Balanced compute and memory resources

Hybrid SSD and HDD configurations

NO.73 Which features are critical when deploying a VxRail cluster?
(Choose two)
Response:

High-speed NICs

Fibre Channel switches

Redundant power supplies

vSAN data deduplication

NO.74 A customer is planning to expand an existing VxRail vSAN cluster. Their current rack is full, so the cluster has to expand to an additional rack. Due to networking requirements, each rack is a Layer 2 boundary, so the new nodes require new management, vSAN, and vMotion subnets.
When designing the solution, what are two considerations that the architect should consider? (Choose two.)

Automatic node discovery is not supported; manual discovery must be used.

VxRail Manager must remain in the first rack.

vSAN ESA is not supported. Only vSAN OSA is supported.

VMware Cloud Foundation is not supported.

Because each rack is a Layer 2 boundary with different subnets, automatic node discovery is not supported, so manual discovery is required.
VxRail Manager must remain in the original rack to maintain cluster management continuity across racks.

NO.75 What are the two types of port groups of vSphere Distributed Switches? (Choose two.)

Virtual machine port groups

Uplink port groups

VMkernel port groups

[Distributed port groups

The two types of port groups on a vSphere Distributed Switch are Virtual Machine port groups (for VM traffic) and VMkernel port groups (for host management, vSAN, vMotion, etc.).

NO.76 What are three supported VxRail Stretched Cluster configuration? (Choose three.)

All flash on Site A and hybrid on Site B

L2 and L3 site-to-site connectivity

vSAN ESA on Site A and vSAN OSA on Site B

Two nodes and a witness

Four nodes and a witness

Both Layer 2 (L2) and Layer 3 (L3) site-to-site connectivity are supported for VxRail stretched clusters.
Configurations with two nodes plus a witness and four nodes plus a witness are supported cluster sizes for stretched clusters, providing fault tolerance across sites.

NO.77 What are two requirements for automatic node discovery? (Choose two.)

The switches must be configured to allow IPv6 multicast traffic.

The internal management VLAN must be configured on the switches for the nodes.

The switches must be configured to allow IPv4 multicast traffic.

The management IP addresses must be set on the nodes.

Automatic node discovery requires the internal management VLAN to be properly configured on the switches for node communication, and the switches must allow IPv4 multicast traffic to enable discovery protocols to function correctly.

NO.78 What is a key requirement for a VxRail rack during installation?
Response:

Minimum of 60U space

Dedicated cooling system

Proper grounding and power redundancy

Integration with Fibre Channel networks

NO.79 What benefits does vSAN ESA offer in a VxRail cluster?
(Choose two)
Response:

Reduced latency for all-flash workloads

Improved data deduplication ratios

Simplified RAID configuration

Enhanced scalability for hybrid storage

NO.80 Which data source provides virtualization, storage and network metrics that can be imported into the VxRail Sizing tool?

RVTools

Sizer Export

Live Optics

Live Optics collects and provides detailed virtualization, storage, and network workload metrics that can be imported into the VxRail Sizing Tool to inform accurate sizing and planning.

NO.81 Which factors impact the design of a 2-node VxRail cluster?
(Choose two)
Response:

Witness host deployment

Dedicated Fibre Channel connectivity

VLAN segregation for management and storage traffic

Enabling multipathing for vSAN traffic

NO.82 Which consideration is unique to vSAN ESA design in VxRail clusters?
Response:

Fault domain configuration

All-flash storage support

Witness host deployment

VLAN segregation

NO.83 What is the primary purpose of reviewing the completed configuration in VxRail Manager?
Response:

Optimizing workload performance

Ensuring accuracy before deployment

Configuring fault tolerance domains

Enabling real-time performance monitoring

NO.84 Which power supply configuration is recommended for a VxRail cluster?
Response:

Single power supply for cost-efficiency

Redundant power supplies for high availability

Portable power units for mobility

Solar-powered backup for environmental compliance

NO.85 What is the primary function of a vSphere Distributed Switch in a VxRail cluster?
Response:

Provides fault domain configuration.

Manages and organizes traffic across the cluster.

Configures snapshots for all virtual machines.

Allocates IP addresses to nodes.

NO.86 What is the minimum number of nodes required for erasure coding with FTT=2 in a vSAN ESA cluster?

5 nodes

4 nodes

3 nodes

6 nodes

For erasure coding with a Failure to Tolerate (FTT) of 2 in a vSAN ESA cluster, a minimum of 5 nodes is required to provide the necessary redundancy and data protection.

NO.87 What are two traffic types that must be configured during all VxRail cluster deployments? (Choose two.)

vMotion

Guest VM

Management

vSAN

Management and vSAN traffic types must always be configured during VxRail cluster deployments to ensure proper cluster operation and storage communication.

Loading …