Verified NSE5_FAZ-6.2 Dumps Q&As – NSE5_FAZ-6.2 Test Engine with Correct Answers [Q22-Q40]

Verified NSE5_FAZ-6.2 Dumps Q&As – NSE5_FAZ-6.2 Test Engine with Correct Answers

Pass Your NSE5_FAZ-6.2 Dumps as PDF Updated on 2022 With 68 Questions

Fortinet NSE 5 – FortiAnalyzer (NSE5 FAZ-6.2) Exam Certification Path

The Fortinet Network Security Expert (NSE) program is an eight-level training and certification program designed to provide objective confirmation of your network security expertise and knowledge to interested technical professionals. A broad range of self-paced and instructor-led courses are included in the NSE curriculum, as well as realistic, experiential activities that demonstrate mastery of complex concepts of network security.

For the Network Security Analyst, candidates must complete only 2 exams from the available five options. These exams are listed below:

• Fortinet NSE 5 – FortiClient-EMS
• Fortinet NSE 5 – FortiAnalyzer
• Fortinet NSE 5 – FortiSIEM
• Fortinet NSE 5 – FortiEDR (coming soon)
• Fortinet NSE 5 – FortiManager

Prerequisites for the exam include familiarity with all topics presented in FortiGate
Security and FortiGate Infrastructure and Knowledge of SQL SELECT syntax.

Introduction to Fortinet NSE 5 – FortiAnalyzer (NSE5 FAZ-6.2) Exam

This exam is part of the preparation for the NSE 5 certification exam. The Fortinet Network Security Analyst title honors the ability to use Fortinet safety devices to incorporate network security monitoring and analytics. Four courses are offered by the Network Security Analyst program. For network and security professionals who need the skills to centrally monitor, evaluate, and report on Fortinet security devices, Fortinet recommends this program. For network and security professionals who need the skills to centrally monitor, evaluate, and report on Fortinet security devices, we recommend this course. You must pass a minimum of two Fortinet NSE 5 certification tests successfully:

• Fortinet NSE 5 – FortiEDR (coming soon)
• Fortinet NSE 5 – FortiSIEM
• Fortinet NSE 5 – FortiManager
• Fortinet NSE 5 – FortiAnalyzer NSE5 FAZ-6.2 exam test
• Fortinet NSE 5 – FortiClient-EMS

The basics of using FortiAnalyzer for centralized logging and reporting will be taught to learners. Students will learn how to configure and deploy FortiAnalyzer and by recording, review, and reporting, detect threats and attack patterns. Finally, some beneficial troubleshooting strategies will be tested by learners. Students can explore administration and management in interactive labs; register FortiAnalyzer log collection devices; use FortiAnalyzer to centrally collect logs; conduct a forensic log review based on simulated network attacks; generate reports; explore solutions to common problems of misconfiguration.

NO.22 When you perform a system backup, what does the backup configuration contain? (Choose two.)

 Generated reports

 Device list

 Authorized devices logs

 System information

https://help.fortinet.com/fa/cli-olh/5-6-5/Content/Document/1400_execute/backup.htm

NO.23 In the FortiAnalyzer FortiView, source and destination IP addresses from FortiGate devices are not resolving to a hostname.
How can you resolve the source and destination IP addresses, without introducing any additional performance impact to FortiAnalyzer?

 Resolve IP addresses on a per-ADOM basis to reduce delay on FortiView while IPs resolve

 Configure # set resolve-ip enable in the system FortiView settings

 Configure local DNS servers on FortiAnalyzer

 Resolve IP addresses on FortiGate

Explanation/Reference: https://forum.fortinet.com/tm.aspx?m=156950

NO.24 By default, what happens when a log file reaches its maximum file size?

 FortiAnalyzer overwrites the log files.

 FortiAnalyzer stops logging.

 FortiAnalyzer rolls the active log by renaming the file.

 FortiAnalyzer forwards logs to syslog.

NO.25 What is the purpose of a predefined template on the FortiAnalyzer?

 It can be edited and modified as required

 It specifies the report layout which contains predefined texts, charts, and macros

 It specifies report settings which contains time period, device selection, and schedule

 It contains predefined data to generate mock reports

Reference:
2300_Reports/0010_Predefined_reports.htm#:~:text=FortiAnalyzer%20includes%20a%20number%
20of,create%20and%2For%20build%20reports.&text=A%20template%20populates%20the%20Layout,that%
20is%20to%20be%20created.
https://help.fortinet.com/fa/faz50hlp/56/5-6-2/FMG-FAZ/2300_Reports/0010_Predefined_reports.htm

NO.26 View the Exhibit:

Why is the total quota less than the total system storage?

 3.6% of the system storage is already being used.

 Some space is reserved for system use, such as storage of compression files, upload files, and temporary report files

 The oftpd process has not archived the logs yet

 The logfiled process is just estimating the total quota

NO.27 What statements are true regarding disk log quota? (Choose two)

 The FortiAnalyzer stops logging once the disk log quota is met.

 The FortiAnalyzer automatically sets the disk log quota based on the device.

 The FortiAnalyzer can overwrite the oldest logs or stop logging once the disk log quota is met.

 The FortiAnalyzer disk log quota is configurable, but has a minimum o 100mb a maximum based on the reserved system space.

NO.28 On the RAID management page, the disk status is listed as Initializing.
What does the status Initializing indicate about what the FortiAnalyzer is currently doing?

 FortiAnalyzer is ensuring that the parity data of a redundant drive is valid

 FortiAnalyzer is writing data to a newly added hard drive to restore it to an optimal state

 FortiAnalyzer is writing to all of its hard drives to make the array fault tolerant

 FortiAnalyzer is functioning normally

NO.29 View the exhibit:

What does the 1000MB maximum for disk utilization refer to?

 The disk quota for the FortiAnalyzer model

 The disk quota for all devices in the ADOM

 The disk quota for each device in the ADOM

 The disk quota for the ADOM type

NO.30 On FortiAnalyzer, what is a wildcard administrator account?

 An account that permits access to members of an LDAP group

 An account that allows guest access with read-only privileges

 An account that requires two-factor authentication

 An account that validates against any user account on a FortiAuthenticator

NO.31 What are two advantages of setting up fabric ADOM? (Choose two.)

 It can be used for fast data processing and log correlation

 It can be used to facilitate communication between devices in same Security Fabric

 It can include all Fortinet devices that are part of the same Security Fabric

 It can include only FortiGate devices that are part of the same Security Fabric

NO.32 Which FortiAnalyzer feature allows you to retrieve the archived logs matching a specific timeframe from another FortiAnalyzer device?

 Log upload

 Indicators of Compromise

 Log forwarding an aggregation mode

 Log fetching

https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/651442/fetcher-management

NO.33 Which two settings must you configure on FortiAnalyzer to allow non-local administrators to authenticate to FortiAnalyzer with any user account in a single LDAP group? (Choose two.)

 A local wildcard administrator account

 A remote LDAP server

 A trusted host profile that restricts access to the LDAP group

 An administrator group

NO.34 For which two SAML roles can the FortiAnalyzer be configured? (Choose two.)

 Principal

 Service provider

 Identity collector

 Identity provider

Reference:
20the%20identity%20provider%20(IdP,external%20identity%20provider%20is%20available.
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/981386/saml-admin-authentication

NO.35 What is the recommended method of expanding disk space on a FortiAnalyzer VM?

 From the VM host manager, add an additional virtual disk and use the #execute lvm extend <disk number> command to expand the storage

 From the VM host manager, expand the size of the existing virtual disk

 From the VM host manager, expand the size of the existing virtual disk and use the # execute format disk command to reformat the disk

 From the VM host manager, add an additional virtual disk and rebuild your RAID array

NO.36 When you perform a system backup, what does the backup configuration contain? (Choose two.)

 Generated reports

 Device list

 Authorized devices logs

 System information

NO.37 Which log type does the FortiAnalyzer indicators of compromise feature use to identify infected hosts?

 Antivirus logs

 Web filter logs

 IPS logs

 Application control logs

Explanation/Reference: https://help.fortinet.com/fa/faz50hlp/60/6-0-2/Content/ FortiAnalyzer_Admin_Guide/3600_FortiView/0200_Using_FortiView/1200_Compromised_hosts_page.htm
?TocPath=FortiView%7CUsing%20FortiView%7C_____6

NO.38 FortiAnalyzer reports are dropping analytical data from 15 days ago, even though the data policy setting for analytics logs is 60 days.
What is the most likely problem?

 Quota enforcement is acting on analytical data before a report is complete

 Logs are rolling before the report is run

 CPU resources are too high

 Disk utilization for archive logs is set for 15 days

NO.39 View the exhibit.

What does the data point at 14:35 tell you?

 FortiAnalyzer is dropping logs.

 FortiAnalyzer is indexing logs faster than logs are being received.

 FortiAnalyzer has temporarily stopped receiving logs so older logs’ can be indexed.

 The sqlplugind daemon is ahead in indexing by one log.

Explanation
Logs are received then they are indexed, no logging server in the world can index logs faster than they are received. When FAZ receives raw logs, they are inserted (indexed) by the SQL database and the sqlplugind daemon, this graph shows that FAZ received 3 logs and sqlplugind indexed 4.

NO.40 What is the main purpose of using an NTP server on FortiAnalyzer and all of its registered devices?

 Log correlation

 Host name resolution

 Log collection

 Real-time forwarding

 Loading …

For more info read reference:

Exam Blueprint
Preparatory Course
FAQs and Guide

Pass Fortinet NSE5_FAZ-6.2 Exam Info and Free Practice Test: https://www.examstorrent.com/NSE5_FAZ-6.2-exam-dumps-torrent.html

         

Related Links: www.stes.tyc.edu.tw myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt