Oct 31, 2022 C_IBP_2202 Exam Crack Test Engine Dumps Training With 80 Questions [Q45-Q67]

Rate this post

Oct 31, 2022 C_IBP_2202 Exam Crack Test Engine Dumps Training With 80 Questions

Obtain the C_IBP_2202 PDF Dumps Get 100% Outcomes Exam Questions For You To Pass

SAP C_IBP_2202 Exam Syllabus Topics:

Topic	Details
Topic 1	Create statistical forecast using historical data with basic methods Planning Operators & Application Jobs
Topic 2	Configure supply planning, run various solvers to generate planning results Solution Architecture
Topic 3	Use the Fiori Launchpad to customize the UI, work with Excel UI Key Figures & Attributes
Topic 4	Describe the benefits of implementing SAP’s Integrated Business Planning solution Create and use key figures and attributes

NO.45 Which of the following are features of the S&OP process templates? Note: There are 2 correct Answers to this question.

The number of steps in a process template is the same for all implementations.

Each step depicted in the template can have tasks associated with it.

All process templates are assigned to dashboards.

New instances of templates allow for re-use of the same processes again.

NO.46 You created a key figure and want to add calculations. Which of the following rules do you consider?
Note: There are 2 correct Answers to this question.

All key figure calculations have calculation inputs, which can be marked as stored or calculated.

The calculation chain for a key figure must always result in a calculated key figure.

Aggregation calculations using SUM or MAX functions must be based on a higher aggregation U level.

Key figures can be calculated across different planning levels.

NO.47 Which of the following are features of lag-based snapshots? Note: There are 2 correct Answers to this question.

Target key figures for these snapshots are exposed to the user in planning views.

Lag-based snapshots are created in the Configuration app for a fixed time range.

Target key figures for these snapshots must have lag as a root attribute.

Lag-based snapshots are automatically assigned to a snapshot operator.

NO.48 What actions can be performed in the Advanced Dashboards application? Note: There are 3 correct Answers to this question.

Rename the charts.

Add process templates.

Organize charts.

Display all assigned analytics on a single UI.

Link two analytics charts.

NO.49 When you promote calculated and approved inventory parameters from SAP IBP for inventory, what other IBP modules can be receiving them?
Note: There are 2 correct Answers to this question.

SAP IBP for sales and operations

SAP IBP for response and supply

SAP IBP for demand

DDMRP

NO.50 You are creating advanced copy operators as part of an SAP IBP solution that is being implemented.
What do you need to be aware of when defining data transfer? Note: There are 2 correct Answers to this question.

Specifying target key figure is mandatory.

Specifying target key figure that is time independent is possible.

Specifying source key figure is mandatory.

Selecting by attribute with option ‘contain’ is possible.

NO.51 Which of the following settings can you use in your supply planning background job triggered from Excel?
Note: There are 2 correct Answers to this question.

Planning unit

UOM to ID

Target currency

Type of algorithm to use

NO.52 You run a what-if analysis and use the scenario planning function. Which actions can you perform? Note:
There are 3 correct Answers to this question.

Run a scenario-specific inventory optimization job.

Share data with other users.

Run a scenario-specific demand sensing job.

Display data in analytics.

Change scenario-specific master data.

NO.53 You create a planning filter using an SAP IBP Fiori app. Which of the following objects can it be applied to?
Note: There are 2 correct Answers to this question.

Planning view templates in the SAP IBP add-in for Microsoft Excel

Supply chain graph in Supply Chain Network app

Snapshot operator in the SAP IBP add-in for Microsoft Excel

Jobs in the Applications Jobs app

NO.54 Which of the following key functions are supported by SAP IBP for sales and operations? Note: There are 2 correct Answers to this question.

Manual creation of feasible constrained plans

Finite resource planning

A basic demand planning process

An advanced demand planning process

NO.55 You have set up a planning area and data is available. You adjust the necessary time profile settings and run the consistency check.
Which settings can you change and still run a successful consistency check?
Note: There are 2 correct Answers to this question.

Change the past and future horizon of the levels in the time profile.

Remove an attribute assigned to the time profile level if the attribute is used in a planning level.

Add a new time profile level to the time profile.

Change the description of the attributes in the time profile.

NO.56 Which conditions are prerequisites for key figure disaggregation?

The key figure is calculated and editable.

The key figure is calculated and aggregation mode is selected.

The key figure is set to Not Editable.

The key figure is stored and editable.

NO.57 Which of the following approaches could you take to reduce run times of an optimizer? Note: There are
2 correct Answers to this question.

Use a subnetwork ID to reduce the size of the problem.

Split into multiple planning areas to support weekly vs. daily planning needs.

Avoid using telescopic time buckets.

Increase the use of incremental lot size beyond the frozen horizon.

NO.58 What are the ways to achieve rolling aggregation with SAP IBP?

Using attribute as a key figure

Using key figure calculation

Using local member

Using aggregation mode average

NO.59 Which of the following can be used as inputs for inventory level optimization? Note: There are 2 correct Answers to this question.

Target inventory level

Lead time variability

Lot sizes

Reorder point

NO.60 What are some of the prerequisites for configuring a planning area that results in a successful consistency check? Note: There are 2 correct Answers to this question.

Configure at most two input key figures on the same planning level in a key figure calculation.

Assign the compound master data type and its component master data types.

Specify a planning horizon in the planning area for each level of the assigned time profile.

Configure at least one calculated key figure for the planning area.

NO.61 You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level. Which of the following configuration options are possible for this process?
Note: There are 2 correct Answers to this question.

Splitting the values from detailed to aggregated level by using copy operator

Splitting the values from aggregated to detailed level based on stored split-factor key figure

Splitting the values from aggregated to detailed level based on time profile attribute

Splitting the values from aggregated to detailed level using multiplication by the proportions

NO.62 The Analytics Advanced app allows you to work with different types of charts. What can be the origin of the charts you can work with?

SAP IBP VBA Add-in template

Process Templates

Custom Alerts

Dashboards Advanced

NO.63 You are modeling a substitution scenario associated with a promotion. What are some of the Master Data parameters that you need to maintain to ensure desired results generated by the optimizer?
Note: There are 2 correct Answers to this question.

Flag ‘Disable Substitution of Location Products

Loc-Prod Subst Valid-From Date

Promotion duration

Location Product Sub Cost Rate

NO.64 A time profile is defined with the levels of day, technical week, week, month, quarter, and year.
What condition in configuration will allow you to have a different value in the current week, versus all other buckets?

IF(“PERIODID2” =”$$PERIODID2CU$$…)

IF(“PERIODID5” =”$$PERIODID5CU$$…)

IF(“PERIODID4” = “SSPERIODID4CU$$…)

IF(“PERIODID3” =”$$PERIODID3CUSS…)

NO.65 You want to display and edit data in different units of measure (UOM). Which of the following must you consider before you use UOM?
Note: There are 3 correct Answers to this question.

Analytics provide the user with the option to select the target unit of measure.

Unit of measure is an attribute of a master data type, such as Product.

Units of measure are usually not time-dependent.

Units of measure are usually not time-independent.

Conversion to the target unit of measure is handled by functionality of SAP IBP Excel UI

NO.66 You are working on a mid-range plan that spans the seasonal peak and you are evaluating the need for additional crewing. Which of the following parameters can you model to plan production with extra shift(s)?

Incremental production values

Capacity expansion with additional costs

Production source validity at the start of seasonal peak

Adjusted production interactive values

NO.67 Why would you set up a cascading filter in the planning view? Note: There are 2 correct Answers to this question.

To filter attributes based on other attribute filters

To filter using attributes that have a large number of values

To filter data in an Application Job template

To filter attributes based on specific values

Loading …