[Jun-2023] Pass HP HPE6-A81 Tests Engine pdf – All Free Dumps [Q35-Q52]

Rate this post

[Jun-2023] Pass HP HPE6-A81 Tests Engine pdf – All Free Dumps

Aruba Certified ClearPass Expert Written Exam Practice Tests 2023 | Pass HPE6-A81 with confidence!

Earning the HP HPE6-A81 certification is a great way to demonstrate your expertise in ClearPass and set yourself apart in the job market. Certified professionals have demonstrated advanced skills in deploying, managing, and troubleshooting ClearPass solutions, which makes them valuable assets to any organization looking to secure their network resources. By passing this exam, you’ll join a community of certified professionals who are recognized for their expertise in ClearPass and have access to exclusive resources and networking opportunities.

Q35. Refer to the exhibit.

A customer it troubleshooting a client not getting the SHV posture updated and the OnGuard agent shows the Health Status Not Known. What could the user do to update the health status?

connect using an interface that is configured as Managed Interface

reinstall the OnGuard agent from the Wired interface

change the Policy Manager Zone mapping and add the WIRED interface range

modify the agent.conf file and add the WIRED interface to it

Q36. A Customer has these requirements:
* 2.000 loT endpoints that use MAC authentication
* 6.000 endpoints using a mix of username/password and certificate (Corporate/BYOD) based authentication
* 1.000 guest endpoints at peak usage that use guest self-registration
* 1500 BYOD devices estimated as 3 devices per User (500 users)
* 2.500 endpoints that have OnGuard installed and connect on a daily basis What licenses should be installed to meet customer requirements?

11.500 Access. 1.500 Onboard. 2.500 OnGuard

13.000 Access. 1.500 Onboard. 2.500 OnGuard

9.000 Access. 500 Onboard. 2.500 OnGuard

11.500 Access. 500 Onboard. 2.500 OnGuard

Q37. Which statements art true about the Database server certificate? (Select two)

Database certificate can be created to take a secure backup of the ClearPass database.

ClearPass Policy Manager nodes validates the Database certificate while joining the cluster

Custom Database certificate requires Subject Alternative Name (SAN) field with the DNS name of the server.

A change in Database certificate will only be applicable after a reboot of the node

Database server certificate is optional for the ClearPass servers that are part of a Cluster.

Q38. What configuration steps should you follow to add terms and conditions page on Guest seIf-registration for CPPM? (Select two).

Edit the creetoraccepiterms form field in register page and change HTML section by pointing the hyperlink to the HTML file uploaded

Edit the accept_terms form field in receipt page and change HTML section by pointing the hyper link to the HTML file uploaded m Guest Manager

Create an HTML page with custom terms and condition and upload it to public files under Clearpass Guest -> configuration -> content manager

Edit the creatoracceprterms form field in receipt page and change HTML section by pointing the hyperlink to the HTML file uploaded

Create an HTML page with custom terms and condition and upload it to private files under Clearpass Guest -> configuration -> content manager

Q39. Refer to the exhibit.

A customer has just configured a Posture Policy and the T 2 -Health check Service. Next they installed the OnGuard Agent on a test client connected to the Secure_Employee SSID. When they check Access Tracker they see many WEBAUTH requests are being triggered What could be the reason’

The OnGuard Agent trigger the events based on changing the Health Status.

The OnGuard Agent is connecting to the Data Port interface on ClearPass.

TCP port 6658 is not allowed between the client and the ClearPass server.

OnGuard Web-Based Health Check interval has been configured to three minutes.

Q40. A customer is troubleshooting the OnGuard Client Activity and is looking into the Live Monitoring -> OnGuard Activity section. What is the Status field representing for this client ?

the Client health status is HEALTHY

the Client has been successfully profiled

the Client is online and sends keep-alive messages

the Client is successful authenticated

Q41. Refer to the exhibit.

A customer has configured Onboard in a cluster with two nodes. All devices were onboarded in the network through node1 but those clients fail to authenticate through node2 with the error shown What steps would you suggest to make provisioning and authentication work across the entire cluster? (Select three)

Configure the Network Settings in Onboard to trust the Policy Manager EAP certificate.

Have all of the BYOO clients disconnect and reconnect to the network.

Configure the Onboard Root CA to trust the Policy Manager EAP certificate root.

Make sure that the EAP certificates on both nodes are issued by one common root Certificate Authority (CA).

Q42. Refer to the exhibit.

You have configured an Onboard portal for single SSID provision. During testing you notice that the QuickConnect Application did not display the “Connect” button, only the finish button. To get connected the test user had to manually connect to the secure-HS-5007 SSID but was prompted for a username and password. Using the screenshots as a reference, how would you fix this issue?

Check the network settings for the correct SSID name spelling.

Install a public signed HTTPS web server certificate on the ClearPass server

Change the network settings to use EAP-TLS for the authentication protocol.

Configure the SSID to support both EAP-PEAP and EAP-TLS authentication method

Q43. The customer would like to add a default common self-registration sponsor email under the initial value on all the ten self-registration pages created for different locations except for the guest registration page created for Sunnyvale location to use a different sponsor email in initial value. Under self-registration form fields, you have “Edit” and “Edit Base Field” Which edit options will you choose to make minimal configuration changes to implement the customer’s requirement? (Select two)

Update the common sponsor email by clicking the “Edit” option of the sponsor email form field on the one of the self-registration register form page

Update the sponsor email by clicking on both “Edit” and “Edit Base Field” options of the sponsor_email filed on the Sunnyvale register page

Update the specific sponsor email by clicking on “Edit Base Field” option of the sponsor_email form filed on the Sunnyvale location register form page

Update the common sponsor email by clicking the “Edit Base Field” option of the sponsor_email form field on the one of the self-registration form page

Update the specific sponsor email by clicking on the “Edit” option of the sponsor_email form filed on the Sunnyvale self-registration register form page

Q44. Your customer has recently implemented a seIf-registration portal in ClearPass Guest to be used on a Guest SSID broadcast from an Aruba controller Your customer has started complaining that the users are not able to reliably access the Internet after clicking the login button on the receipt page They tell you that the users will click the login button multiple times and after about a minute they gam access.
What could be causing this issue?

The enforcement profile on ClearPass is set up with an IETF:session delay.

The self-registration page is configured with a 1 minute login delay.

The guest users are assigned a firewall user role that has a rate limit.

The guest users are assigned multiple DNS servers delaying DNS response.

Q45. Refer to the exhibit.

A customer has incomplete information for endpoints in the Endpoint Repository. In order to make accurate decisions about what types of devices are connecting to the network. ClearPass is enabled to process the device information from IF-MAP interface, but no updates are received. What can the customer do to update those endpoints using IF-MAP?

Configure ClearPass Management IP in the DHCP Helper address

Configure IF-MAP on all networking devices to send additional information to ClearPass

Configure IF-MAP only on Aruba Mobility Controller, providing ClearPass username and password

Configure the authentication service to Audit the endpoints using, the embedded Nmap Server

Q46. Refer to the exhibit.

When creating a new report, there is in option to send report Notifications by Email Where is the email server configured?

In the ClearPass Policy Manager Messaging Setup under Administration.

In the Insight report on the next screen of the report definition

In the Insight Reports Interface under Administration on the sidebar menu

In the ClearPass Policy Manager Endpoint Context Servers under Administration.

Q47. A customer is planning to implement machine and user authentication on infrastructure with one Aruba Controller and a single ClearPass Server. What should the customer consider while designing this solution? (Select three.)

The customer does not need to worry about Multi-Master Catht Survivability because the Controller will also cache the machine state.

The Windows User must log off. restart or disconnect their machine to initiate a machine authentication before the cache expires.

The machine authentication status rs written in the Multi-master cache on the ClearPass Server for 24 hrs

The Customer should enable Multi-Master Cache Survivability as the Aruba Controller will not cache the machine state.

Machine Authentication only uses EAP TLS. as such a PKI infrastructure should be in place for machine authentication.

Onboard must be used to install the Certificates on the personal devices to do the user and machine authentication

Q48. Refer to the exhibit.

A customer has configured Onboard in a cluster. After the Primary server’s failure, the BYOD devices fail to connect to the network. Which step below is the best starting point when troubleshooting’

Verify the CPPM hostname in OSCP URL under TLS authentication method is updated to localhost instead of primary server’s hostname.

Reboot the active ClearPass server and reconnect the client to the SSID by selecting the correct certificate when prompted.

Check if a DNS entry is available for the ClearPass hostname in the certificate, resolvable from the DNS server assigned to the client.

Check EAP certificate on the secondary node is issued by the same common root Certificate Authority (CA).

Q49. Refer to the exhibit.

A customer is doing a new ClearPass installation and is setting up clustering between two ClearPass servers running a 6.8.6 version. The ClearPass server failed to add the subscriber node. The customer was able to login to the console of the ClearPass server with the same CLI password used during the cluster setup. The customer has sent you the screenshots seeking your support Why did an attempt to add a subscriber node failed showing that error?

The data and time in the subscriber was not synchronized with the NTP server

The subscriber server is running with a default self -signed HTTPS certificate

The default database certificate used in the publisher server is not a valid certificate

The subscriber server is running with a public signed and trusted HTTPS certificate

Q50. While configuring the service rule conditions which NAS-Port-Type value should be used to differentiate the service for wired and wireless authentication?

Ethernet (5) and Wireless-802 11 (9)

Ethernet (15) and Wireless-802 II (19)

Ethernet (O)and W.reless-802 11 (1)

Ethernet (19) and Wireless-802 11(18)

Q51. A customer has two different geographical sites deployed with two ClearPass servers in each site. Site A has the Publisher (CPPM1) and a subscriber (CPPM2) and Site B has two subscribers (CPPM3 S CPPM4) All wired and wireless authentication requests from the respective sites are handled by respective CPPMs deployed in the sites When both the CPPM servers in Site B are lost, the authentications from Site B is handled by Site A subscriber (CPPM2). To control the Multi-Master Cache flush and reduce the amount of inter-site traffic, the customer also created a new Policy Manager Zone (Zone1) The Site B CPPM3 & CPPM4 are part of Zone! and Site A CPPM2 is also mapped to Zone1 as it will act as the backup RADIUS server for Site B The corporate laptops are installed with Persistent agent to run the OnGuard check and the OnGuard settings are also mapped to the Zones The Site A corporate user subnets are mapped to default zone and the Site 6 corporate user subnets are mapped to Zone1. The customer has the following issue in the setup: The corporate clients from Site A authenticating against the CPPM2 as their Primary RADIUS server assigns Quarantine enforcement profile even though the user s health status is Healthy.
What is the cause of this issue?

Multi-master cache also contains the roles and posture of the associated and unassociated clients and is shared with all members part of that Policy Manager Zone. CPPM2 belongs to Zone1 and the OnGuard setting for Site A is part of the default zone and the system health validation information is sent to one of the nodes that are part of its home zone As Posture cache for Site A hi not available with CPPMZ. it fails to apply the enforcement profile based on correct health status.

Multi-master cache also contains the roles and posture of the connected clients and is shared only with the members part of that Policy Manager Zone. CPPM2 belongs to Zone1 and the OnGuard setting for Site A is part of the default zone and the OnGuard system health validation information is sent to one of the nodes that are part of its home zone only. As Posture cache for Site A is not available with CPPM2. it fails to apply the enforcement profile based on correct health status.

Multi-master cache also contains the roles and posture of the connected clients and is shared across all members part of the cluster. The OnGuard setting for Site A is part of only the default zone and the system health validation information is sent to one of the nodes that are part of its home zone only As the OnGuard setting of the Site A corporate user subset is not mapped with default as well as Zone1. CPPM2 fails to apply the enforcement profile based on correct health status.

Multi-master cache also contains the roles and posture of the connected clients and is shared across all members part of the cluster. The OnGuard setting for Site A is part of only the default zone and the OnGuard system health validation information is sent to one of the nodes that is part of its home zone only. As the CPPM2 is also not mapped to the default zone as well as Zone1, CPPM2 fails to apply the enforcement profile based on correct health status.

Q52. Refer to the exhibit.

A customer with multiple Aruba Controllers has just installed a new certificate for “‘.customerdomain.com- on all Aruba Controllers While testing the existing guest Self-Registration page the customer noticed that the logins are failing While troubleshooting they are finding no entries in the Event Viewer or Access Tracker for the tests Suspecting that the Aruba Controllers may not be properly posting the credentials from the guest browser, they open the NAS Vendor Settings for the Guest Self-Registration Page.

Add PTR records on the DNS server for “securelogin arubanetworks.com”.

Change the “Secure Login’ field to “Use Vendor Default”.

Change the ‘IP Address field to” securelogin.customerdomain.com

Change the “IP Address field to “captiveportal-login.customerdomain.com”.

Preparing for the HPE6-A81 exam requires a deep understanding of ClearPass technology, as well as practical experience in designing and deploying ClearPass solutions. Candidates can take advantage of Aruba’s official training courses and study materials, as well as practice exams and hands-on labs, to prepare for the exam and ensure success in earning the ACCX certification.

The HPE6-A81 exam is a written exam that consists of 60 multiple-choice questions. The exam is timed, and candidates are given two hours to complete it. The exam is available in English and Japanese, and candidates can take it at any Pearson VUE testing center worldwide. To be eligible for the exam, candidates must have a minimum of three years of experience in designing, implementing, and managing enterprise-level networks.

Online Exam Practice Tests with detailed explanations!: https://www.examstorrent.com/HPE6-A81-exam-dumps-torrent.html