NSE7_PBC-6.4 Premium PDF & Test Engine Files with 30 Questions & Answers [Q13-Q35]

Rate this post

NSE7_PBC-6.4 Premium PDF & Test Engine Files with 30 Questions & Answers

Get 100% Real NSE7_PBC-6.4 Exam Questions, Accurate & Verified Answers As Seen in the Real Exam!

The Fortinet NSE7_PBC-6.4 exam covers a wide range of topics related to public cloud security, including cloud computing concepts, cloud security architecture, cloud data security, cloud infrastructure security, and cloud application security. It also covers specific public cloud platforms, such as Amazon Web Services (AWS), Microsoft Azure, and Google Cloud Platform (GCP). Candidates will be required to demonstrate their knowledge of these topics through multiple-choice questions, hands-on lab exercises, and scenario-based questions.

NO.13 Your company deploys FortiGate VM devices in high availability (HA) (active-active) mode with Microsoft Azure load balancers using the Microsoft Azure ARM template. Your senior administrator instructs you to connect to one of the FortiGate devices and configure the necessary firewall rules. However, you are not sure now to obtain the correct public IP address of the deployed FortiGate VM and identify the access ports.
How do you obtain the public IP address of the FortiGate VM and identify the correct ports to access the device?

In the configured load balancer, access the inbound NAT rules section.

In the configured load balancer, access the backend pools section.

In the configured load balancer, access the inbound and outbound NAT rules section.

In the configured load balancer, access the health probes section.

NO.14 Which three properties are configurable Microsoft Azure network security group rule settings? (Choose three.)

Action

Sequence number

Source and destination IP ranges

Destination port ranges

Source port ranges

NO.15 Refer to the exhibit.

You attempted to deploy the FortiGate-VM in Microsoft Azure with the JSON template, and it failed to boot up. The exhibit shows an excerpt from the JSON template.
What is incorrect with the template?

The LUN ID is not defined.

FortiGate-VM does not support managedDisk from Azure.

The caching parameter should be None.

The CreateOptions parameter should be FromImage.

NO.16 Which two Amazon Web Services (AWS) topologies support east-west traffic inspection within the AWS cloud by the FortiGate VM? (Choose two.)

A single VPC deployment with multiple subnets and a NAT gateway

A single VPC deployment with multiple subnets

A multiple VPC deployment utilizing a transit VPC topology

A multiple VPC deployment utilizing a transit gateway

NO.17 Refer to the exhibit.

The exhibit shows a topology where multiple connections from clients to the same FortiGate-VM instance, regardless of the protocol being used, are required.
Which two statements are correct? (Choose two.)

The design shows an active-active FortiGate-VM architecture.

The Cloud Load Balancer Session Affinity setting should be changed to CLIENT_IP.

The design shows an active-passive FortiGate-VM architecture.

The Cloud Load Balancer Session Affinity setting should use the default value.

NO.18 Refer to the exhibit.

You are deploying a FortiGate-VM in Microsoft Azure using the PAYG/On-demand licensing model. After you configure the FortiGate-VM, the validation process fails, displaying the error shown in the exhibit.
What caused the validation process to fail?

You selected the incorrect resource group.

You selected the Bring Your Own License (BYOL) licensing mode.

You selected the PAYG/On-demand licensing model, but did not select correct virtual machine size.

You selected the PAYG/On-demand licensing model, but did not associate a valid Azure subscription.

NO.19 An organization deployed a FortiGate-VM in the Google Cloud Platform and initially configured it with two vNICs. Now, the same organization wants to add additional vNICs to this existing FortiGate-VM to support different workloads in their environment.
How can they do this?

They can create additional vNICs using the Cloud Shell.

They cannot create and add additional vNICs to an existing FortiGate-VM.

They can create additional vNICs in the UI console.

They can use the Compute Engine API Explorer.

NO.20 Refer to the exhibit.

In your Amazon Web Services (AWS) virtual private cloud (VPC), you must allow outbound access to the internet and upgrade software on an EC2 instance, without using a NAT instance. This specific EC2 instance is running in a private subnet: 10.0.1.0/24.
Also, you must ensure that the EC2 instance source IP address is not exposed to the public internet. There are two subnets in this VPC in the same availability zone, named public (10.0.0.0/24) and private (10.0.1.0/24).
How do you achieve this outcome with minimum configuration?

Deploy a NAT gateway with an EIP in the private subnet, edit the public main routing table, and change the destination route 0.0.0.0/0 to the target NAT gateway.

Deploy a NAT gateway with an EIP in the public subnet, edit route tables, select Public-route, and delete the route destination 10.0.0.0/16 to target local.

Deploy a NAT gateway with an EIP in the private subnet, edit route tables, select Private-route, and add a new route destination 0.0.0.0/0 to the target internet gateway.

Deploy a NAT gateway with an EIP in the public subnet, edit route tables, select Private-route and add a new route destination 0.0.0.0/0 to target the NAT gateway.

NO.21 Which two statements about the Amazon Cloud Services (AWS) network access control lists (ACLs) are true?
(Choose two.)

Network ACLs are stateless, and inbound and outbound rules are used for traffic filtering.

Network ACLs are stateful, and inbound and outbound rules are used for traffic filtering.

Network ACLs must be manually applied to virtual network interfaces.

Network ACLs support allow rules and deny rules.

NO.22 You have been tasked with deploying FortiGate VMs in a highly available topology on the Amazon Web Services (AWS) cloud. The requirements for your deployment are as follows:
*You must deploy two FortiGate VMs in a single virtual private cloud (VPC), with an external elastic load balancer which will distribute ingress traffic from the internet to both FortiGate VMs in an active-active topology.
*Each FortiGate VM must have two elastic network interfaces: one will connect to a public subnet and other will connect to a private subnet.
*To maintain high availability, you must deploy the FortiGate VMs in two different availability zones.
How many public and private subnets will you need to configure within the VPC?

One public subnet and two private subnets

Two public subnets and one private subnet

Two public subnets and two private subnets

One public subnet and one private subnet

NO.23 An Amazon Web Services (AWS) auto-scale FortiGate cluster has just experienced a scale-down event, terminating a FortiGate in availability zone C.
This has now black-holed the private subnet in this availability zone.
What action will the worker node automatically perform to restore access to the black-holed subnet?

The worker node applies a route table from a non-black-holed subnet to the black-holed subnet.

The worker node moves the virtual IP of the terminated FortiGate to a running FortiGate on the worker node’s private subnet interface.

The worker node modifies the route table applied to the black-holed subnet changing its default route to point to a running FortiGate on the worker node’s private subnet interface.

The worker node migrates the subnet to a different availability zone.

NO.24 Refer to the exhibit.

In your Amazon Web Services (AWS) virtual private cloud (VPC), you must allow outbound access to the internet and upgrade software on an EC2 instance, without using a NAT instance. This specific EC2 instance is running in a private subnet: 10.0.1.0/24.
Also, you must ensure that the EC2 instance source IP address is not exposed to the public internet. There are two subnets in this VPC in the same availability zone, named public (10.0.0.0/24) and private (10.0.1.0/24).
How do you achieve this outcome with minimum configuration?

Deploy a NAT gateway with an EIP in the private subnet, edit the public main routing table, and change the destination route 0.0.0.0/0 to the target NAT gateway.

Deploy a NAT gateway with an EIP in the public subnet, edit route tables, select Public-route, and delete the route destination 10.0.0.0/16 to target local.

Deploy a NAT gateway with an EIP in the private subnet, edit route tables, select Private-route, and add a new route destination 0.0.0.0/0 to the target internet gateway.

Deploy a NAT gateway with an EIP in the public subnet, edit route tables, select Private-route and add a new route destination 0.0.0.0/0 to target the NAT gateway.

NO.25 When configuring the FortiCASB policy, which three configuration options are available? (Choose three.)

Intrusion prevention policies

Threat protection policies

Data loss prevention policies

Compliance policies

Antivirus policies

NO.26 Refer to the exhibit.

Your senior administrator successfully configured a FortiGate fabric connector with the Azure resource manager, and created a dynamic address object on the FortiGate VM to connect with a windows server in Microsoft Azure. However, there is now an error on the dynamic address object, and you must resolve the issue.
How do you resolve this issue?

Run diagnose debug application azd -l on FortiGate.

In the Microsoft Azure portal, set the correct tag values for the windows server.

In the Microsoft Azure portal, access the windows server, obtain the private IP address, and assign the IP address under the FortiGate-VM AzureLab address object.

Delete the address object and recreate a new address object with the type set to FQDN.

NO.27

Refer to the exhibit. Which two conditions will enable you to segregate and secure the traffic between the hub and the spokes in Microsoft Azure? (Choose two.)

Implement the FortiGate-VM network virtual appliance (NVA) in the hub and use user-defined routes (UDRs) in the spokes.

Use ExpressRoute to interconnect the hub VNets and spoke VNets.

Configure VNet peering between the spokes only.

Configure VNet peering between the hub and spokes.

NO.28 What is the bandwidth limitation of an Amazon Web Services (AWS) transit gateway VPC attachment?

Up to 1.25 Gbps per attachment

Up to 50 Gbps per attachment

Up to 10 Gbps per attachment

Up to 1 Gbps per attachment

NO.29 Customer XYZ has an ExpressRoute connection from Microsoft Azure to a data center. They want to secure communication over ExpressRoute, and to install an in-line FortiGate to perform intrusion prevention system (IPS) and antivirus scanning.
Which three methods can the customer use to ensure that all traffic from the data center is sent through FortiGate over ExpressRoute? (Choose three.)

Install FortiGate in Azure and build a VPN tunnel to the data center over ExpressRoute

Configure a user-defined route table

Enable the redirect option in ExpressRoute to send data center traffic to a user-defined route table

Configure the gateway subnet as the subnet in the user-defined route table

Define a default route where the next hop IP is the FortiGate WAN interface

NO.30 A company deployed a FortiGate-VM with an on-demand license using Amazon Web Services (AWS) Market Place Cloud Formation template. After deployment, the administrator cannot remember the default admin password.
What is the default admin password for the FortiGate-VM instance?

The admin password cannot be recovered and the customer needs to deploy the FortiGate-VM again.

<blank>

admin

The instance-ID value

NO.31 Refer to the exhibit.

A customer has deployed an environment in Amazon Web Services (AWS) and is now trying to send outbound traffic from the Web servers to the Internet. The FortiGate policies are configured to allow all outbound traffic; however, the traffic is not reaching the FortiGate internal interface.
What are two possible reasons for this behavior? (Choose two.)

The web servers are not configured with the default gateway.

The Internet gateway (IGW) is not added to VPC (virtual private cloud).

AWS source and destination checks are enabled on the FortiGate interfaces.

AWS security groups may be blocking the traffic.

NO.32 What is the bandwidth limitation of an Amazon Web Services (AWS) transit gateway VPC attachment?

Up to 1.25 Gbps per attachment

Up to 50 Gbps per attachment

Up to 10 Gbps per attachment

Up to 1 Gbps per attachment

NO.33 Which three properties are configurable Microsoft Azure network security group rule settings? (Choose three.)

Action

Sequence number

Source and destination IP ranges

Destination port ranges

Source port ranges

NO.34 Which two statements about Microsoft Azure network security groups are true? (Choose two.)

Network security groups can be applied to subnets and virtual network interfaces.

Network security groups can be applied to subnets only.

Network security groups are stateless inbound and outbound rules used for traffic filtering.

Network security groups are a stateful inbound and outbound rules used for traffic filtering.

NO.35 An organization deployed a FortiGate-VM in the Google Cloud Platform and initially configured it with two vNICs. Now, the same organization wants to add additional vNICs to this existing FortiGate-VM to support different workloads in their environment.
How can they do this?

They can create additional vNICs using the Cloud Shell.

They cannot create and add additional vNICs to an existing FortiGate-VM.

They can create additional vNICs in the UI console.

They can use the Compute Engine API Explorer.

To be eligible for the NSE7_PBC-6.4 Certification Exam, candidates must have a solid understanding of network security concepts and be familiar with Fortinet’s FortiGate firewall and FortiManager centralized management tool. NSE7_PBC-6.4 exam consists of 60 multiple-choice questions and must be completed within 120 minutes. The passing score for the exam is 70%, and candidates who successfully pass the exam will receive the Fortinet NSE 7 – Public Cloud Security 6.4 certification. Fortinet NSE 7 – Public Cloud Security 6.4 certification is recognized by industry professionals and demonstrates the holder’s mastery of public cloud security concepts and Fortinet’s public cloud security solutions.

NSE7_PBC-6.4 Premium Files Practice Valid Exam Dumps Question: https://www.examstorrent.com/NSE7_PBC-6.4-exam-dumps-torrent.html

admin

You May Also Like

Leave a Reply Cancel reply