Latest Cisco 350-601 Practice Test Questions, Implementing Cisco Data Center Core Technologies (350-601 DCCOR) Exam Dumps [Q216-Q235]

Latest Cisco 350-601 Practice Test Questions, Implementing Cisco Data Center Core Technologies (350-601 DCCOR) Exam Dumps

Sep-2023 Pass Cisco 350-601 Exam in First Attempt Easily

Cisco 350-601 exam is designed for IT professionals who are responsible for designing, deploying, and managing data center infrastructures. Implementing Cisco Data Center Core Technologies (350-601 DCCOR) certification exam is suitable for network architects, systems engineers, network designers, and data center administrators. 350-601 exam is a combination of multiple-choice and performance-based questions, which tests the candidate’s understanding of real-world scenarios.

Cisco 350-601 exam, also known as Implementing Cisco Data Center Core Technologies (350-601 DCCOR), is a certification exam designed for IT professionals seeking to validate their skills and knowledge in implementing and managing data center technologies. 350-601 exam is part of the Cisco Certified Specialist – Data Center Core certification track and is a requirement for the CCNP Data Center and CCIE Data Center certifications.

Skills Outline of Cisco 350-601 Exam

The Cisco 350-601 exam is presented to the candidates in a wide range of topics, which indicate the skills measured. Here they are:

• Network (25%)

  To answer the questions from this first topic, the test takers need to demonstrate that they have the skills and knowledge required to apply routing protocols (FHRP, PIM, MP-BGP, OSPFv2, OSPFv3), implement network configuration management, and implement infrastructure monitoring such as SPAN and NetFlow. This domain also comprises of skills such as describing software updates and their impacts, which means that the students should understand fabric setup, VMM, tenant policies, and access policies. Also, they will be required to answer the questions related to analyzing Cloud deployment and service models, analyzing packet flow (broadcast, multicast, and unicast), applying overlay protocols such as OTV and VXLAN EVPN, and applying switching protocols, for example, vPC, LACP, and RSTP+.

• Storage Network (20%)

  This subject area evaluates the candidates’ proficiency in describing software updates as well as their impacts (EPLD and disruptive/nondisruptive), implementing infrastructure monitoring, describing the NAS and NFS concepts, and implementing FCoE Unified Fabric (DCB and FIP). This topic also encompasses their proficiency in implementing Fiber Chanel. This means that the applicants must have a thorough understanding of zoning, VSAN, NPV and NPIV, device alias, FCNS, CFS, FCID, port channels, and switch fabric initialization.

• Security (15%)

  In the last section, the examinees need to demonstrate their expertise in applying network security, including CoPP, ACI contracts, and micro-segmentation, AAA and RBAC, and first-hope security features, such as port security, DHCP snooping, and dynamic ARP inspection. In addition, the candidates will need to show that they can apply to compute security effectively. Last but not least, they will have to answer the questions related to the application of storage security in reference to AAA and RBAC, fabric binding, and port security.

• Compute (25%)

  Answering the questions from this objective, the applicants have to show that they have the capability to implement Cisco Unified Compute System Rack Servers, implement infrastructure monitoring such as Intersight and SPAN, implement compute management configuration (restore and backup), describe software and firmware updates and their effects on C-Series and B-Series servers, and explain HyperFlex Infrastructure with its benefits (all-flash vs Edge and Hybrid Architecture). Besides, within this knowledge area, the learners’ ability to implement Cisco Compute System Blade Chassis is tested. This means that the students must have the skills needed to accomplish initial setup and infrastructure management. They should also demonstrate their knowledge of server management, storage management, and network management (pools and policies, VLANs, templates, QoS).

• Automation (15%)

  In the framework of this topic, the individuals need to show their competency in implementing automation and scripting tools, including REST API, EEM, Scheduler, Guest Shell and Bash Shell for NX-OS, and JSON and XML encodings. Answering the questions within this domain, they also need to be able to evaluate automation as well as orchestration technologies. This means that they should be well conversant with UCSD, DCNM, POAD, PowerShell, Python, Ansible, and Puppet.

QUESTION 216
A network engineer must configure FCoE on an interface of a Cisco MDS 9000 Series Switch. It should be used for mapping between VLAN 600 and VSAN 6. Drag and drop the commands from the bottom into their implementation order in the FCoE configuration. Not all commands are used.

QUESTION 217
Drag and drop the storage technologies from the left onto the correct descriptions on the right.

QUESTION 218
Which statement is true about upgrading the firmware on a Cisco MDS storage switch with dual supervisors?

 Supervisors can be upgraded independently to test the new firmware.

 The new firmware is loaded on the standby supervisor first.

 Both supervisors load the new firmware and then the active supervisor reboots.

 The standby supervisor must be offline before the firmware upgrade begins.

QUESTION 219
A network engineer must configure a Fibre Channel port monitoring for the local port. The source port should be monitored in the ingress direction. which configuration should be implemented to achieve this objective?

 Option A

 Option B

 Option C

 Option D

QUESTION 220
Drag and drop the network assurance concepts from the left onto the corresponding benefits on the right.

QUESTION 221
An engineer mus! configure the remote SSH management connectivity for Cisco Nexus 9000 Series Switches to meet these requirements The connectivity must be permitted from a jump host with an IP address of 10 10.10 10/24 All switches must be permitted to connect via SSH to other devices from the subnet of 10 .20.20.0/24.
Which configuration set accomplishes these requirements?

 Option C

 Option A

 Option B

 Option D

QUESTION 222
An engineer upgrades the bash on the Cisco Nexus 9000 Series Switch.

Which command must be sed to complete the task?

 upgrade -U

 update -vh

 rpm -qa

 rpm -Uhv

QUESTION 223
Which adjacency server configuration makes two OTV edge devices located in the same site bring up the dual-site adjacency?
A)

B)

C)

D)

 Option A

 Option B

 Option C

 Option D

QUESTION 224
An engineer installed a new Nexus switch with the mgm0interface in vrf management. Connectivity to the rest of the network needs to be tested from the guest shell of the NX-OS. Which command tests connectivity from the shell of the NX-OS?

 Option A

 Option B

 Option C

 Option D

QUESTION 225
Refer to the exhibit.

What is the reason the system-fm-vrrp checkpoint was created?

 The VRRP service restarted and the checkpoint was automatically created.

 The network administrator manually created it.

 The VRRP process crashed and the checkpoint was automatically created.

 The VRRP-enable feature has been disabled.

Explanation
automatically created by the Nexus when the vrrp feature is disabled

QUESTION 226
An engineer configures the properties of a cisco UCS cisco integrated Management controller network adapter for a standalone cisco C-Series server. The Fallback Timeout in the vNIC was set to 600. When the failure occurs. The secondary must be used and then fallback when the primary interface becomes available again.
Which action be taken to meet these requirements?

 Set default VLAN on the adapters.

 Increase Cos to 6.

 Disable VNTAG mode.

 Enable Uplink failover.

Explanation
Enable Uplink Failover check box – Check this box if traffic on this vNIC should fail over to the secondary interface if there are communication problems. VNTAG mode is required for this option.
Failback timeout field – After a vNIC has started using its secondary interface, this setting controls how long the primary interface must be available before the system resumes using the primary interface for the vNIC.
Enter a number of seconds between 0 and 600. VNTAG mode is required for this option.
https://www.cisco.com/en/US/docs/unified_computing/ucs/c/sw/gui/config/guide/1.5/b_Cisco_UCS_C-series_G

QUESTION 227
Refer to the exhibit.

Why does the python code for Cisco NX-API print error message?

 The “type” is wrong in the header of the request and should be “cli_ conf”.

 NX-API does not allow configuration for features via the requests module.

 The “type” is wrong is the body of the request and should be “cli_ conf”.

 The JSON is not a supported format for the NX-API.

QUESTION 228
A network engineer is adding a Cisco HyperFlex data platform to the Cisco intersight management portal.
Which two components are required for Intersight to claim the Cisco HyperFlex data platform? (Choose two.)

 device FQDN

 device public IP address

 device claim code

 device ID

 device serial number

Explanation
Text Description automatically generated

Diagram, application Description automatically generated with medium confidence

https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/HyperFlex_HX_DataPlatformSoftware/ HyperFlex_Installation_Guide_for_Intersight/b_HyperFlex_Installation_Guide_for_Intersight/ b_HyperFlex_Installation_Guide_for_Intersight_chapter_011.html
https://www.cisco.com/c/en/us/support/docs/hyperconverged-infrastructure/hyperflex-hx-dataplatform/
214268-cisco-intersight-hyperflex-installatio.html

QUESTION 229
Refer to the exhibit.

Which two Cisco UCS components are upgraded as a result of the configuration? (Choose two.)

 adapters

 board controller

 IOMs

 BIOS

 Cisco UCS Manager

QUESTION 230
An engineer implements a Cisco UCS C-Series Server that must adhere to these security requirements:
* Unencrypted communication must be disabled.
* The session timeout must not exceed 15 minutes.
* Unencrypted traffic must be automatically diverted.
* CLI-based management must use nondefault ports.
Which configuration set meets these requirements?

 Option A

 Option B

 Option C

 Option D

QUESTION 231
Which two actions should be performed before upgrading the infrastructure and firmware of multiple UCS blades? (Choose two)

 Verify if the bootflash on the fabric interconnects in the Cisco UCS has at least 15% available space

 Enable Smart Call Home feature during the firmware upgrade process

 Verify if the bootflash on the fabric interconnects in the Cisco UCS has at least 10% available space

 Run the Check Conformance feature to verify that all your components are running the compatible firmware version after the upgrade

 Get Full State and All Configuration backup files before beginning the upgrade

QUESTION 232

Refer to the exhibit An engineer must provision a VXLAN deployment The OSPF has already been configured as the underlay protocol All BGP configurations will be performed using the template method The deployment must meet these requirements
* The local update source for leaf switches must be loopback 1
* The router ID must be the local loopback IP address
* The external BGP connections must use a template name
Drag and drop the configuration snippets from the bottom to complete the configuration

QUESTION 233
An engineer must suggest a deployment model for a newly developed application. The engineer has a small starting budget and lacks technical knowledge and infrastructure to implement store, operating system and database services to support the application deployment. The engineer also needs usage data related to the service and the ability to elastically scale the deployment as customer demands grow. Which two models must be used to meet the requirements? (Choose two)

 infrastructure as a service

 private cloud

 public cloud

 software as a service

 platform as a service

QUESTION 234
Which Cisco network assurance engine feature helps reduce the need for Tier 1 network operation centers to escalate issues?

 detailed TCAM optimization

 DVR audit trails

 operator playbooks

 detailed runbooks

Explanation
https://www.cisco.com/c/en/us/products/collateral/data-center-analytics/network-assurance-engine/at-a-glance-c4

QUESTION 235
An engineer is implementing NetFlow on a Cisco Nexus 7000 Series Switch. Drag and drop the NetFlow commands from the left into the correct order they must be entered on the right.

Explanation
1- feature netflow
2- flow exporter
3- flow monitor
4- interface<interface>

 Loading …

Free 350-601 Exam Files Downloaded Instantly 100% Dumps & Practice Exam: https://www.examstorrent.com/350-601-exam-dumps-torrent.html

         

Related Links: mentor.khai.edu scalar.usc.edu myportal.utt.edu.tt scalar.usc.edu myportal.utt.edu.tt myportal.utt.edu.tt