[2024] Pass your 300-510 exam with this 100% Free 300-510 Braindump [Q35-Q52]

Rate this post

[2024] Pass your 300-510 exam with this 100% Free 300-510 Braindump

View All 300-510 Actual Exam Questions, Answers and Explanations for Free

Cisco 300-510 is an advanced level certification exam designed for professionals who want to enhance their skills and knowledge in the field of service provider routing solutions. 300-510 exam is designed to test the abilities of candidates to configure, troubleshoot, and manage advanced routing technologies that are used in a service provider environment. Implementing Cisco Service Provider Advanced Routing Solutions certification validates the skills and knowledge necessary for the implementation of advanced routing technologies and solutions.

QUESTION 35
Refer to the exhibit.

Traffic flow from router R1 to router R6 is delay-sensitive It must consider potential link-failure and node-failure conditions Which configuration must an engineer apply to router R1 to route traffic to router R6 if router R2 fails?

Option A

Option B

Option C

Option D

QUESTION 36
Refer to the exhibit. An engineer working for a private telecommunication company with an employee id 3977 74 814 implemented the configuration on Router 1. What is the effect of it?

Router 1 sends and receives multiple best paths from neighbor 192.168.1.1

Router 1 sends up to three paths to neighbor 192.168.1.1 for all routes

Router 1 sends only one best path to neighbor 192 168.1.1.

Router 1 receives only one best path from neighbor 192.168.1.1

QUESTION 37
A network engineer is troubleshooting OSPF multiare A.
Which Cisco IOS XR feature should the engineer use in order to streamline OSPF issue?

hierarchical CLI

DR support for topology management

routing process enabled by default on all interfaces

show ip ospf topology command

OSPF Hierarchical CLI and CLI Inheritance
Hierarchical CLI is the grouping of related network component information at defined hierarchical levels such as at the router, area, and interface levels.
Hierarchical CLI allows for easier configuration, maintenance, and troubleshooting of OSPF configurations.
When configuration commands are displayed together in their hierarchical context, visual inspections are simplified. Hierarchical CLI is intrinsic for CLI inheritance to be supported.
With CLI inheritance support, you need not explicitly configure a parameter for an area or interface. In the software, the parameters of interfaces in the same area can be exclusively configured with a single command, or parameter values can be inherited from a higher hierarchical level-such as from the area configuration level or the router ospf configuration levels.
More information: https://www.cisco.com/c/en/us/td/docs/iosxr/ncs5500/routing/71x/b-routing-cg-ncs5500-71x/b-routing-cg-ncs5500-71x_chapter_011.html#con_1059437
Reference: guide/rc40xr12k_chapter4.html#con_1059437

QUESTION 38
Which command is used to enable BIDIR-PIM under global configuration mode for Cisco IOS XE Sofware?

ip pim bidir-enable

ipv4 pim bidir-enable

ip multicast-routing

ip pim bidir

Reference:
imc_basic_cfg.html

QUESTION 39
Which expression, when used with the as-path-set command, matches the AS path attribute of the route?

neighbor-is

dfa-regtex

ios-regex

Length

QUESTION 40

Refer to the exhibit. A network operator must stop 10.33.33.33/32 from being redistributed into Level 1 router XR1. Which configuration meets this need?

Explanation/Reference:

QUESTION 41
Refer to the exhibit

Which router does R1 install as an alternate next hop when trying to reach R3 if LFA is enabled?

QUESTION 42
Compare different features between OSPFv2 and OSPFv3. Drag and drop the descriptions of OSPF from the left onto the correct OSPF versions on the right.

QUESTION 43
Refer to the exhibit.

Refer to the exhibit. A network engineer configured three new PE routers to expand the network. The new routers run in the IS-IS routing protocol and reside in the data center in the same exchange as the existing routers. However, the network is now experiencing suboptimal routing. The Layer 2 configuration and VLANs are configured correctly to provide segregation between networks, but the Level 1 routes are not being converted to Level 2 routes. Which action resolves the issue?

On Router 1, redistribute the routes into IGP.

On Router 1, summarize internal routes between areas.

On Router 2, redistribute the routes into IGP.

On Router 2. summarize internal routes between areas.

QUESTION 44
Refer to the exhibit.

How are packets directed through the data plane when SRv6 is implemented?

An ordered list of segments is encoded in a routing extension header

The MPLS data plane is used to push labels onto IGP routes

A stack of labels represents an ordered list of segments

The packet is encapsulated with a header and trailer encoding the ordered list of segments

QUESTION 45
An engineer is troubleshooting end-to-end customer traffic across an MPLS VPN service provider network. Which tasks should the engineer use to solve the routing issues? Drag and drop the table types from the left onto the most useful troubleshooting tasks/router types on the right. (Not all options are used.)

QUESTION 46
Refer to the exhibit.

A network operator must stop 10.33.33.33/32 from being redistributed into Level 1 router XR1. Which configuration meets this need?

Option A

Option B

Option C

Option D

QUESTION 47

Refer to the exhibit. Which task must you perform on interface g1/0/0 to complete the SSM implementation?

configure OSPFv3

enable CDP

disable IGMP

configure IGMPv3

Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_pim/configuration/xe-16/imc-pim-xe-16- book/imc-ssm.html

QUESTION 48
Refer to the exhibit.

Refer to the exhibit. Customers A and C are experiencing packet drops when connecting to the application server While troubleshooting the problem the network engineer confirms that the IS-lS Level- 1/2 adjacency is up between routers A B C. and D and both customers can communicate with the database server without packet loss Which action must the engineer take to resolve the issue?

Advertise the application server subnet in the router D IS-IS database

Advertise a static default route to the router B IS-IS database.

Leak the 172, 17.10/24 route in the IS-IS databases on routers A and C.

Leak the customer A and customer C subnets in the router A IS-IS database.

QUESTION 49

Refer to the exhibit. Which effect of this configuration is true?

It sets the keepalive timer to 30 seconds and the hold timer to 240 seconds.

It sets the keepalive timer to 30 milliseconds and the hold timer to 240 milliseconds

It sets the hold timer to 30 milliseconds and the keepalive timer to 240 milliseconds

It sets the hold timer to 30 seconds and the keepalive timer to 240 seconds

Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_bgp/command/irg-cr-book/bgp-s1.html#wp1552800140

QUESTION 50

Refer to the exhibit. A network engineer implemented this segment routing configuration. Which statement about the output is true?

This range conflicts with the segment routing local block range.

The device must be reloaded for these ranges to be allocated and used.

The default segment routing global block range is being used on this device.

A nondefault segment routing global block range is being used on this device.

Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr920/configuration/guide/segment-routing/ segment-routing-book/seg-routing-global-block.html

QUESTION 51
Refer to the exhibit.

A network operator is working to deploy a Unified BGP design and allow it to be available only in selected markets and services in the future. The label allocation is not functioning as desired. Which action will fix the issue?

Remove the allocate-labels command.

Reconfigure the route-policy ALL_LABELS to match all after the drop.

Reconfigure the route-policy ALL_LABELS to pass.

Remove the route policy and only configure “allocate-label”.

QUESTION 52
Refer to the exhibit.

Refer to the exhibit. Users at the branch office on R1 reported issue with an application at the home office on R4. While troubleshooting the issue, a network engineer determined that The branch-office users can connect to the home office.
The IS-IS adjacencies between R1 and R2 and R1 and the branch office are up.
Traffic from R1 to the R2 10.20.1.0/24 network is moving normally.
The application at the home office is experiencing packet drops on the connection to the Branch, and R3 cannot reach the R1 172.16.10.0/24 network.
Which action resolves the issues?

Redistribute static connected routes in IS-IS on router RI.

Configure the IS-IS core instance on the RI GigabitEthernet0/3 interface.

Redistribute static connected routes in IS-IS on router R4.

Configure the IS-IS core instance on the R2 GigabitEthernet0/1 interface.

Loading …

How to book the Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam

Typically, up to six weeks in advance and as late as the same day, you can schedule an exam. You must follow these steps to participate in the Implementing Cisco Service Provider Advanced Routing Solutions 300-510 SPRI exam test:

Step 1: Visit the Pearson VUE website by clicking here
Step 3: Login or create an account
Step 3: Enter the exam number i.e., 300-510
Step 3: Follow the details on the website
Step 4: Pay for your exam via credit card or exam vouchers

300-510 dumps Free Test Engine Verified By It Certified Experts: https://www.examstorrent.com/300-510-exam-dumps-torrent.html