5V0-31.22 Exam Dumps Free Test Engine Verified By VMware Certified Specialist Certified Experts [Q34-Q57]

NO.34 A systems administrator is tasked to deploy VMware Cloud Foundation (VCF) and has already deployed the VMware Cloud Builder appliance.
What is the next step the systems administrator should take?

Deploy the Management Domain using VMware Cloud Builder.

Prepare and configure the ESXi hosts to be used in the deployment.

Configure the Management Domain using custom certificates.

Upload the Deployment Parameter Workbook.

NO.35 A systems administrator is implementing stretched clusters in an environment with multiple Availability Zones (AZs). Which statement accurately describes this design?

For VLANs that are stretched between AZs, configure load balancing in the Layer 3 gateway between AZs

Layer 3 networks must be stretched between the AZs by the physical infrastructure

The Layer 3 gateway for the workload domain and Edge overlay networks must be highly available across the AZs.

If VLAN is stretched between AZ1 and AZ2, the Layer 3 network must also be stretched between the two AZs.

NO.36 Which service is integrated with VMware Cloud Foundation and enables a centralized and simplified lifecycle management of ESXi host?

vRealize Suite Lifecycle Manager

vSphere Lifecycle Manager

Solutions Manager

vCenter Lifecycle Manager

NO.37 An architect is tasked with deploying a new VI Workload Domain cluster to support the HR system. The default storage policy must satisfy the following requirements:
* Support two host failures
* Use the least amount of hosts
* Maximize user capacity
Which configuration will satisfy these requirements?

4 Hosts, FFT=2, RAID 5/6

5 Hosts, FFT=2, RAID 1

4 Hosts, FTT=2, RAID 1

5 Hosts, FFT=2. RAID 5/6

NO.38 A VMware Cloud Foundation administrator is required to enable Workload Management (vSphere with Tanzu) on an existing workload domain cluster, which is currently licensed with a vSphere Enterprise Plus license.
Which action, if any, is required to complete this task?

Add a license for vSphere with Tanzu with sufficient CPU capacity to the SDDC Manager inventory, and then assign the license to the cluster in SDDC Manager

No action is required since SDDC Manager licenses include an entitlement for vSphere with Tanzu.

No action is required since the vSphere Enterprise Plus license supports vSphere with Tanzu.

Add a license for vSphere with Tanzu with sufficient CPU capacity to both the SDDC Manager and vCenter Server, and then assign the license to the cluster in vCenter Server

NO.39 A systems administrator is tasked to deploy a management domain during VMware Cloud Foundation Bring-Up process. What are the minimum hardware requirements for the management cluster?

2 vSAN Ready Nodes, 192 GB RAM per server, and 4 10GbE NICs

8 vSAN Ready Nodes, 256 GB RAM per server, and 2 10GbE NICs

4 vSAN Ready Nodes, 192 GB RAM per server, and 2 10GbE NICs

6 vSAN Ready Nodes, 256 GB RAM per server, and 4 10GbE NICs

NO.40 Which component is upgraded when using the SDDC Manager management domain upgrade workflow in VMware Cloud Foundation?

VMware Cloud Builder

VMware vRealize Network Insight

Workload Domain vCenter Server

VMware NSX-T Manager nodes

NO.41 An administrator is tasked with changing the password of the SDDC Manager super user account in a newly installed VCF environment.
Which method must the administrator use to complete this task?

1 Log in to SDDC manager Ul as a user with the ADMIN role.
2. Go to Administration > Security > Password Management.
3. Select the SDDC Manager account from the component drop-down menu.
4. Click Rotate Now button.

1 SSH in to the SDDC Manager VM using the vcf user account.
2. Switch to the root user
3. Enter the passwd admin command.
4. Enter and retype the new password.

1 Log in to the SDDC manager Ul as a user with the ADMIN role
2. Go to Developer Center > API Explorer
3. Expand APIs for managing users.
4. Update password for root user.

1 SSH in to the SDDC Manager VM using the vcf user account.
2. Switch to the root user.
3. Enter the passwd vcf command.
4. Enter and retype the new password.

NO.42 Which two options can be used to create a new VMware Cloud Foundation VI workload domain? (Choose two.)

PowerCLI

REST API

Cloud Builder Ul

vCenter Ul

SDDC Manager Ul

NO.43 Which order of steps should an administrator use to replace a failed host in a stretched cluster?

Decommission the failed host.
2. Remove the host using cluster APIs.
3. Add the newly commissioned host to the cluster using cluster APIs. 4 Commission the new host with the correct network.

1 Remove the host using cluster APIs.
2. Decommission the failed host.
3. Commission the new host with the correct network.
4. Add the newly commissioned host to the cluster using cluster APIs.

Remove the host using cluster APIs
2. Decommission the failed host.
3. Add the newly commissioned host to the cluster using cluster APIs.
4. Commission the new host with the correct network

1 Decommission the failed host
2. Remove the host using cluster APIs.
3. Commission the new host with the correct network.
4. Add the newly commissioned host to the cluster using cluster APIs.

NO.44 Which two steps must be performed to create a vSphere with Tanzu namespace? (Choose two.)

Deploy a vSphere Cluster

Define resource limits

Enable Harbor Image Registry

Assign permissions

Use a DNS-compliant name

NO.45 What is a characteristic about the Credentials Worksheet in the Deployment Parameter Workbook?

Passwords can be common only for appliance users.

Passwords can be different per user.

Passwords must be different per user.

Passwords must be common across all users.

NO.46 Which two roles are provided by a local NSX Manager appliance? (Choose two.)

Compliance

Policy

Controller

Orchestrator

Authorization

NO.47 An administrator is planning to deploy an edge cluster in a VMware Cloud Foundation environment. Which three NSX components are automated during this deployment? (Choose three.)

Segments for VM workloads

Tier-0 VRF gateway configuration

Tier-0 and Tier-1 gateway configuration

Edge Uplink Profile configuration

Edge VM deployment

Transport Node Profile configuration

NO.48 Which two configuration steps must a VMware Cloud Foundation administrator apply to achieve north/south connectivity while setting up an edge VM node for a workload domain from the SDDC Manager user interface? (Choose two.)

ToR Switches VRFs

OSPF Configuration

BGP Configuration

vSphere VDS Uplinks

NSX VDS Uplinks

NO.49 Which two use cases would require the creation of multiple clusters in a workload domain? (Choose two.)

Different application licensing models

Different host CPU types

Different virtual machine workload types

Different memory requirements

Bare-Metal vs. virtual workloads

NO.50 Which two requirements are needed to add new hosts to an existing VI workload in a VMware Cloud Foundation environment? (Choose two.)

The host uses the same storage type as the existing cluster hosts.

The host uses heterogenous hardware.

The host uses a minimum of four network ports.

The host uses the same network pool

The host uses only the VLAN network.

NO.51 An administrator has registered an external identity source in a consolidated architecture and would like to make sure that any subsequent workload domains can be accessed using the same identity sources.
How can this goal be achieved with VMware Cloud Foundation?

By configuring IWA as an identity source

By configuring LDAPS as an identity source

By keeping the pre-configured defaults

By replicating vSphere SSO configuration

NO.52 A VMware architect has been asked to design a VMware Cloud Foundation solution for an online gaming company. The Chief Information Officer (CIO) of the company has asked the architect to focus on these requirements:
* The environment should be optimized for maximum hardware utilization.
* The environment should be highly available.
Which method meets these requirements and is supported for vCenter Server with VMware Cloud Foundation?

Storage level snapshots

vSphere HA

vSphere FT

vCenter HA

NO.53 Which two options are only available when using vSphere Lifecycle Manager Images? (Choose two.)

Upgrade VM Hardware Compatibility versions.

Update the firmware of all ESXi hosts in a cluster.

Install and update third-party software on all ESXi hosts in a cluster.

Check the hosts and clusters against the vSAN Hardware Compatibility List.

Upgrade and patch ESXi hosts.

NO.54 What limits can an administrator configure on a vSphere Namespace for a VMware Cloud Foundation Developer-Ready Workload Domain?

Tanzu Kubemetes Cluster master nodes

Secrets

Tanzu Kubernetes Cluster worker nodes

Persistent Volumes

NO.55 Which two features are supported when implementing NSX Federation? (Choose two.)

DHCP dynamic binding

Identity Firewall

NAT operations

Load Balancer

DHCP

NO.56 An architect is designing overlay networking and routing for two VMware Cloud Foundation VI workload domains The following requirements must be met in the design:
* NSX-T Bare Metal Edge nodes are required to satisfy a requirement for extremely low latency.
* The costs must be kept to a minimum.
Which design meets these customer requirements?

Create separate NSX-T Manager clusters for each workload domain, and then create a single NSX-T Bare Metal Edge cluster to be shared between NSX-T Manager clusters.

Place the Bare Metal Edge nodes in the same rack as the management domain hosts, and then add the NSX-T Bare Metal Edge cluster to the management domain NSX-T Manager cluster.

Share an NSX-T Manager cluster between both workload domains, and then add the NSX-T Bare Metal Edge cluster to the shared NSX-T Manager cluster.

Create separate NSX-T Manager clusters for each workload domain, and then create separate NSX-T Bare Metal Edge clusters for each workload domain.

NO.57 Which two options can be used to create a new VMware Cloud Foundation VI workload domain? (Choose two.)

SDDC Manager Ul

PowerCLI

Cloud Builder Ul

vCenter Ul

REST API