CCE-N 1Y0-440 Exam Dumps and Certification Test Engine [Q10-Q32]

Q10. Scenario: A Citrix Architect needs to assess an existing on-premises NetScaler deployment which includes Advanced Endpoint Analysis scans. During a previous security audit, the team discovered that certain endpoint devices were able to perform unauthorized actions despite NOT meeting pre-established criteria.
The issue was isolated to several endpoint analysis (EPA) scan settings.
Click the Exhibit button to view the endpoint security requirements and configured EPA policy settings.

Which setting is preventing the security requirements of the organization from being met?

Q11. Under which two circumstances will a service be taken out of the slow start phase with automated slow start?
(Choose Two)

Q12. Under which two circumstances will a service be taken out of the slow start phase with automated slow start?
(Choose two.)

Q13. Scenario: A Citrix Architect is asked by management at the Workslab organization to review their existing configuration and make the necessary upgrades. The architect recommends small changes to the pre-existing NetScaler configuration. Currently, the NetScaler MPX devices are configured in a high availability pair, and the outbound traffic is load-balanced between two Internet service providers 9ISPs). However, the failover is NOT happening correctly.
The following requirements were discussed during the design requirements phase:
* The return traffic for a specific flow should be routed through the same path while using Link Load Balancing.
* The link should fail over if the ISP router is up and intermediary devices to an ISP router are down.
* Traffic going through one ISP router should fail over to the secondary ISP, and the traffic should NOT flow through both routers simultaneously.
What should the architect configure with Link Load balancing (LLB) to meet this requirement?

Q14. Scenario: A Citrix Architect needs to assess an existing NetScaler configuration. The customer recently found that members of certain administrator groups were receiving permissions on the production NetScaler appliances that do NOT align with the designed security requirements.
Click the Exhibit button to view the configured command policies for the production NetScaler deployment.

To align the command policy configuration with the security requirements of the organization, the _______ for ______should change. (Choose the correct option to complete the sentence.)

Q15. Scenario: A Citrix Architect has configured NetScaler Gateway integration with a XenApp environment to provide access to users from two domains: vendorlab.com and workslab.com. The Authentication method used is LDAP.
Which two steps are required to achieve Single Sign-on StoreFront using a single store? (Choose two.)

Q16. Scenario: A Citrix Architect needs to assess a Citrix Gateway deployment that was recently completed by a customer and is currently in pre-production testing The Citrix Gateway needs to use ICA proxy to provide access to a Citrix Virtual Apps and Citrix Virtual Desktops environment. During the assessment, the customer informs the architect that users are NOT able to launch published resources using the Gateway virtual server.
Click the Exhibit button to view the troubleshooting details collected by the customer.

Which two reasons could cause this issue? (Choose two)

Q17. Scenario: A Citrix Architect needs to design a new Citrix Gateway deployment for a customer. During the design discussions, the architect documents the key requirements for the Citrix Gateway.

Click the Exhibit button to view the key requirements.
The architect should configure Citrix Gateway for __________________in order to meet the stated requirements. (Choose the correct option to complete the sentence.)

Q18. A Citrix Architect has deployed Citrix Application Delivery Management to monitor a high availability pair of Citrix ADC VPX devices.
The architect needs to deploy automated configuration backup to meet the following requirements:
* The configuration backup file must be protected using a password.
* The configuration backup must be performed each day at 8:00 AM GMT.
* The configuration backup must also be performed if any changes are made in the ns.conf file.
* Once the transfer is successful, auto-delete the configuration file from the NMAS.
Which SNMP trap will trigger the configuration file backup?

Q19. Scenario: A Citrix Architect needs to assess an existing NetScaler multi-site deployment. The deployment is using Global Server Load Balancing (GSLB) configured in a parent-child configuration.
Click the Exhibit button to view the diagram of the current GSLB configuration and parent-child relationships, as well as the status of the sites and the connectivity between them.

Based on the displayed configuration and status, Child_site1_______ a connection from _______. (Choose the correct option to complete the sentence.)

Q20. Scenario: A Citrix Architect has deployed two MPX devices, 12.0.53.13 nc and MPX 11500 models, in high availability (HA) pair for the Workspace labs team. The deployment method is two-arm and the devices are installed behind a CISCO ASA 5585 Firewall. The architect enabled the following features on the NetScaler devices. Content Switching, SSL Offloading, Load Balancing, NetScaler Gateway, Application Firewall in hybrid security and Appflow. All are enabled to send monitoring information to NMAS 12.0.53.13 nc build.
The architect is preparing to configure load balancing for Microsoft Exchange 2016 server.
The following requirements were discussed during the implementation:
* All traffic needs to be segregated based on applications, and the fewest number of IP addresses should be utilized during the configuration
* All traffic should be secured and any traffic coming into HTTP should be redirected to HTTPS.
* Single Sign-on should be created for Microsoft Outlook web access (OWA).
* NetScaler should recognize Uniform Resource Identifier (URl) and close the session to NetScaler when users hit the Logoff button in Microsoft Outlook web access.
* Users should be able to authenticate using either user principal name (UPN) or sAMAccountName.
* The Layer 7 monitor should be configured to monitor the Microsoft Outlook web access servers and the monitor probes must be sent on SSL Which monitor will meet these requirements?

Q21. Scenario: A Citrix Architect needs to assess a NetScaler Gateway deployment that was recently completed by a customer and is currently in pre-production testing. The NetScaler Gateway needs to use ICA proxy to provide access to a XenApp and XenDesktop environment. During the assessment, the customer informs the architect that users are NOT able to launch published resources using the Gateway virtual server.
Click the Exhibit button to view the troubleshooting details collected by the customer.

What is the cause of this issue?

Q22. Which statement is applicable to Citrix Gateway split tunneling?

Q23. Scenario: A Citrix Architect needs to configure a full VPN session profile to meet the following requirements:
Users should be able to send the traffic only for the allowed networks through the VPN tunnel.
Only the DNS requests ending with the configured DNS suffix workspacelab.com must be sent to NetScaler Gateway.
If the DNS query does NOT contain a domain name, then DNS requests must be sent to NetScaler gateway.
Which settings will meet these requirements?

Q24. A Citrix Architect has deployed NetScaler Management and Analytics System (NMAS) to monitor a high availability pair of NetScaler VPX devices.
The architect needs to deploy automated configuration backup to meet the following requirements:
* The configuration backup file must be protected using a password.
* The configuration backup must be performed each day at 8:00 AM GMT.
* The configuration backup must also be performed if any changes are made in the ns.conf file.
* Once the transfer is successful, auto-delete the configuration file from the NMAS.
Which SNMP trap will trigger the configuration file backup?

Q25. Scenario: A Citrix Architect needs to design a hybrid XenApp and XenApp and XenDesktop environment which will include Citrix Cloud as well as resource locations in on-premises datacenter and Microsoft Azure.
Organizational details and requirements are as follows:
* Active XenApp and XenDesktop Service subscription
* No existing NetScaler deployment
* About 3,000 remote users are expected to regularly access the environment
* Multi-factor authentication should be used for all external connections
* Solution must provide load balancing for backend application servers
* Load-balancing services must be in Location B
Click the Exhibit button to view the conceptual environment architecture.

The architect should use ________ in Location A, and should use _________ in Location
B. (Choose the correct option to complete the sentence.)

Q26. A Citrix Architect needs to evaluate and define the architecture and operational processes required to implement and maintain the production environment. In which two phases of the Citrix Methodology will the architect define this? (Choose two.)

Q27. Scenario: A Citrix Architect needs to assess an existing on-premises NetScaler deployment which includes Advanced Endpoint Analysis scans. During a previous security audit, the team discovered that certain endpoint devices were able to perform unauthorized actions despite NOT meeting pre-established criteria.
The issue was isolated to several endpoint analysis (EPA) scan settings.
Click the Exhibit button to view the endpoint security requirements and configured EPA policy settings.
Which setting is preventing the security requirements of the organization from being met?

Q28. Scenario: A Citrix Architect needs to design a new NetScaler Gateway deployment to provide secure RDP access to backend Windows machines.
Click the Exhibit button to view additional requirements collected by the architect during the design discussions.

To meet the customer requirements, the architect should deploy the RDP proxy through _______, using a
_________ solution. (Choose the correct option to complete the sentence.)

Q29. Which parameter must a Citrix Architect configure to ensure that HDX Proxy Connection terminates upon AAA Session TimeOut?

Q30. Scenario: Based on a discussion between a Citrix Architect and team of Workspacelab has been created across three (3) sites.
They captured the following requirements during the design discussion held for NetScaler design projects:
All three (3) Workspacelab sites (DC, NDR, and DR) will have similar NetScaler configuration and design.
Both external and internal NetScaler MPX appliances will have Global Server Load balancing (GSLB) configured and deployed in Active/Passive mode.
GSLB should resolve both A and AAA DNS queries.
In the GSLB deployment, the NDR site will act as backup for the DC site. whereas the DR site will act as backup for the NDR site.
When the external NetScaler replies to DNS traffic coming in through Cisco Firepower IPS, the replies should be sent back through the same path.
On the internal NetScaler, both front-end VIP and back-end SNIP will be part of the same subnet.
USIP is configured on the DMZ NetScaler appliances.
The external NetScaler will act default gateway for back-end servers.
All three (3) sites (DC, NDR, and DR) will have two (2) links to the Internet from different service providers configured in Active/Standby mode.
Which design decision must the architect make to meet the design requirements above?

Q31. Scenario: A Citrix Architect needs to design a hybrid XenApp and XenDesktop environment which will include as well as resource locations in an on-premises datacenter and Microsoft Azure.
Organizational details and requirements are as follows:
Active XenApp and XenDesktop Service subscription
No existing NetScaler deployment
Minimization of additional costs
All users should correct directly to the resource locations containing the servers which will host HDX sessions Click the Exhibit button to view the conceptual environment architecture.

The architect should use___________ in Location A, and should use _______________ in Location B. (Choose the correct option to complete the sentence.)

Q32. Scenario: A Citrix Architect has implemented two high availability pairs of MPX 5500 and MPX 11500 devices respectively with 12.0.53.13 nc version. The NetScaler devices are set up to handle NetScaler Gateway, Load Balancing, Application Firewall, and Content Switching. The Workspacelab infrastructure is set up to be monitored with NMAS version 12.0.53.13 nc by the Workspacelab administrators. The Workspacelab team wants to implement one more pair of NetScaler MPX 7500 devices with version
12.0.53.13 nc.
The Citrix consulting team has assigned the task to implement these NetScaler devices in the infrastructure and set them up to be monitored and managed by NMAS.
The following are the requirements that were discussed during the project initiation call:
* NMAS should be configured to get the infrastructure information under sections such as HDX Insight, WEB Insight, and Security Insight.
* Configuration on the new MPX devices should be identical to MPX 11500 devices.
* Configuration changes after the deployment and initial setup should be optimized using NMAS.
* NMAS should be utilized to configure templates that can be utilized by the Workspacelab team in future deployment.
* As per the requirement from the Workspacelab team, NMAS should be store the audited data for only
15 days.
Which process should the architect utilize to ensure that the deployment of MPX 11500 devices are optimized and that it is correct, before deploying the devices in production?