[Q19-Q39] The NSE5_FNC_AD_7.6 PDF Dumps Greatest for the Fortinet Exam Study Guide!

Rate this post

The NSE5_FNC_AD_7.6 PDF Dumps Greatest for the Fortinet Exam Study Guide!

Read Online NSE5_FNC_AD_7.6 Test Practice Test Questions Exam Dumps

Fortinet NSE5_FNC_AD_7.6 Exam Syllabus Topics:

Topic	Details
Topic 1	Concepts and Initial Configuration: This domain covers organizing infrastructure devices within FortiNAC-F and understanding isolation networks for quarantining non-compliant devices. It includes using the configuration wizard for initial system setup and deployment.
Topic 2	Deployment and Provisioning: This domain focuses on configuring security automation for automatic event responses, implementing access control policies, setting up high availability for system redundancy, and creating security policies to enforce network security requirements.
Topic 3	Integration: This domain addresses connecting FortiNAC-F with other systems using Syslog and SNMP traps, managing multiple instances through FortiNAC-F Manager, and integrating Mobile Device Management for extending access control to mobile devices.
Topic 4	Network Visibility and Monitoring: This domain covers managing guest and contractor access, utilizing logging options for tracking network events, configuring device profiling for automatic device identification and classification, and troubleshooting network device connection issues.

NEW QUESTION 19
As part of a FortiNAC-F integration with FortiGate for management of VPN users, what must be configured on FortiGate to keep FortiNAC-F up to date with VPN session information?

SNMP traps

RADIUS accounting

Security Fabric integration

Syslog messages

NEW QUESTION 20

An administrator has configured the DHCP scope for a registration isolation network, but the isolation process isn ‘ t working.
What is the problem with the configuration?

The domain name server designation is incorrect.

The label uses a system-reserved value.

The lease pool does not contain a complete subnet.

The gateway defined for the scope is incorrect.

NEW QUESTION 21
A network administrator is troubleshooting a network access issue for a specific host. The administrator suspects the host is being assigned a different network access policy than expected.
Where would the administrator look to identify which network access policy, if any, is being applied to a particular host?

The Policy Logs view

The Connections view

The Policy Details view for the host

The Port Properties view of the hosts port

NEW QUESTION 22
During the testing of a newly modeled infrastructure switch, the administrator is not seeing hosts as they connect or move from one port to another. What would cause this issue?

MAC notification traps are misconfigured.

Layer 3 polling is failing.

The default scheduled polling is disabled.

Contact polling is not configured.

NEW QUESTION 23
When creating a user or host profile, which three criteria can you apply? (Choose three.)

Host or user group memberships

Host or user attributes

Adapter current VLAN

An applied access policy

Location

NEW QUESTION 24
Where should you configure MAC notification traps on a supported switch?

Only on ports that generate linkup and linkdown traps

Only on ports defined as learned uplinks

On all ports on the switch

On all ports except uplink ports

NEW QUESTION 25
Two FortiNAC-F devices have been configured as a 1 + 1 HA pair. The primary server went offline and a successful failover to the secondary has occurred. What happens if the primary server comes back online?

The primary and secondary servers will resume communication and the secondary will maintain control.

The secondary server will update the primary and the servers will load balance until an administrator forces the primary to resume full control.

The primary server will determine that the secondary has control and power down for maintenance.

After five successful heartbeats between the servers, the primary server will resume control.

NEW QUESTION 26
In which three ways would deploying a FortiNAC-F Manager into a large environment consisting of several FortiNAC-F CAs simplify management? (Choose three.)

Global infrastructure device inventory

Global version control

Global authentication security policies

Pooled licenses

Global visibility

The FortiNAC-F Manager (FortiNAC-M) is designed as a centralized management platform for large-scale distributed environments where multiple FortiNAC-F Control and Application (CA) appliances are deployed across different sites. According to the FortiNAC-F Manager Administration Guide, the deployment of a Manager simplifies administrative overhead in three specific ways:
First, it provides Global Version Control (B). The Manager serves as a central repository for firmware and software updates, allowing administrators to push specific versions to all managed CAs simultaneously, ensuring consistency across the entire fabric. Second, it enables Pooled Licenses (D). Instead of purchasing and managing individual licenses for every CA, licenses are centralized on the Manager. The Manager then distributes these licenses to the CAs as needed based on their host counts. This “floating” license model optimizes cost and prevents individual sites from running out of capacity while others have excess. Third, it offers Global Visibility (E). The Manager aggregates host and device data from every managed CA into a single console. This “single pane of glass” allows an administrator to search for a specific MAC address or user across the entire global organization without logging into individual servers.
While the Manager can assist with configuration templates, authentication security policies (C) and infrastructure modeling (A) are still predominantly managed at the local CA level to ensure site-specific logic and performance.
“The FortiNAC Manager provides a central management console for multiple FortiNAC-F servers (CAs). Key benefits include: * License Management: Licenses are pooled on the Manager and allocated to managed CAs as needed. * Software Management: Firmware updates can be centrally managed and pushed to all CAs from the Manager. * Centralized Monitoring: Provides a global view of all hosts, adapters, and events across the entire managed environment.” – FortiNAC-F Manager Administration Guide: Overview and Benefits.

NEW QUESTION 27
During an evaluation of state-based enforcement, an administrator discovers that ports that should not be under enforcement have been added to enforcement groups.
In which view would the administrator be able to identify who added the ports to the groups?
(Selected)

The Admin Auditing view

The Event Management view

The Port Changes view

The Security Events view

In FortiNAC-F, accountability and forensic tracking of configuration changes are managed through the Admin Auditing functionality. When an administrator performs an action that modifies the system state-such as creating a policy, changing a device’s status, or adding a switch port to an Enforcement Group-the system generates an audit record. This record is essential for troubleshooting scenarios where unauthorized or accidental configuration changes have occurred, leading to unintended network behavior.
The Admin Auditing view (found under Logs > Admin Auditing) provides a comprehensive log of the “Who, What, and When” for every administrative session. Each entry includes the username of the administrator, the source IP address from which they accessed the FortiNAC-F console, a precise timestamp, and a detailed description of the modification. In the scenario described, where ports have been incorrectly added to enforcement groups, the Admin Auditing view allows a supervisor to filter by the specific “Port” or “Group” object to identify exactly which administrator executed the command.
In contrast, the Event Management view (B) is designed to monitor system and network events, such as RADIUS authentications, host connections, and SNMP trap arrivals. While it tracks system activity, it does not typically log the manual configuration changes performed by admins. The Port Changes view (C) tracks the operational history of a port (such as VLAN assignment changes and host movements) but does not attribute the administrative assignment of the port to a group. Finally, the Security Events view (D) is dedicated to alerts triggered by security rules and external threat feeds.
“Admin Auditing displays a record of all modifications made to the FortiNAC-F system by an administrator. This view includes the administrator’s name, the date and time of the change, and a description of the action taken. It is the primary resource for determining which administrative user performed a specific configuration change, such as modifying port group memberships or altering policy settings.” – FortiNAC-F Administration Guide: Logging and Auditing Section.

NEW QUESTION 28
What must an administrator configure to allow FortiNAC-F to process incoming syslog messages that are not supported by default?

A Syslog Service Connector

A Security Action

A Security Event Parser

A Log Receiver

NEW QUESTION 29
Which two requirements must be met to set up an N+1 HA cluster? (Choose two.)

A FortiNAC-F manager

A FortiNAC-F device designated as a secondary

A dedicated VLAN for primary and secondary synchronization

At least two FortiNAC-F devices designated as primary

NEW QUESTION 30
Refer to the exhibit.

Given this topology, and a layer 3 registration network configuration, which IP address would be designated in the DHCP relay configuration for the registration network?

192.168.10.254

192.168.100 75

192.168.100.20

192.168.200.10

NEW QUESTION 31
Refer to the exhibit.

Which devices are automatically evaluated by these device profiling rules?

Rogue devices, only when they are initially added to the database

Known trusted devices, each time they connect

All hosts, each time they connect

Rogue devices, each time they change location

NEW QUESTION 32
Refer to the exhibits.

What would happen if the highlighted port with connected hosts was placed in both the Forced Registration and Forced Remediation port groups?

Both types of enforcement would be applied

Enforcement would be applied only to rogue hosts

Multiple enforcement groups could not contain the same port.

Only the higher ranked enforcement group would be applied.

NEW QUESTION 33
When configuring isolation networks in the configuration wizard, why does a layer 3 network typo allow for mora than ono DHCP scope for each isolation network typo?

The layer 3 network type allows for one scope for each possible host status.

Configuring more than one DHCP scope allows for DHCP server redundancy

There can be more than one isolation network of each type

Any scopes beyond the first scope are used if the initial scope runs out of IP addresses.

NEW QUESTION 34
Which two statements are true about integrating a third-party device using SNMP traps from that device as input to generate an event? (Choose two.)

The sending device must support SNMPv3.

The sending device must be modeled in the inventory topology.

The IP address OID and MAC address OID must be configured in the trap MIB file.

set allowaccess snmp must be configured using the CLI on the FortiNAC-F receiving interface.

NEW QUESTION 35
An administrator wants to use FortiNAC-F to prevent internal engineers from accessing specific websites as defined in web filter categories on FortiGate. In addition to a security trigger and associated action, which configuration must also be defined on FortiNAC-F?

A compliance policy

A firewall policy

A user/host profile

A profiling method

NEW QUESTION 36
Refer to the exhibit.

What will happen to the host of a guest user created from this template if the time of connection is 8:00 PM?

The host will be marked as non-authenticated.

The host will be marked as a rogue device.

The host will be marked as at-risk.

The host will be administratively disabled.

In FortiNAC-F, the Guest & Contractor Template is a configuration object that defines the parameters for accounts created by sponsors or through self-registration. One of the critical security controls within this template is the Login Availability setting. This setting restricts the specific days and times during which a guest or contractor is permitted to authenticate and access the network.
As shown in the exhibit, the “StandardGuest” template has Login Availability set to “Specify Time”, with a schedule defined as Mon-Fri, 6:00 AM to 7:00 PM. If a guest user attempts to connect or authenticate at 8:00 PM, which is outside of the permitted window, FortiNAC-F’s policy engine will automatically deny the authentication request. When an authentication attempt is denied due to schedule restrictions, the system does not move the host into the “Authenticated” or “Registered” state required for production access. Instead, the host is marked as non-authenticated in the adapter or host view.
This behavior ensures that even if a guest possesses valid credentials, their access is strictly bound by the organizational policy for visitor hours. The host will typically remain in its current isolation or registration VLAN, and the user will see a message on the captive portal indicating that their account is not currently authorized for login. It is important to distinguish this from “at-risk” (C), which relates to security scan failures, or “rogue” (B), which typically refers to unknown devices that have not yet been associated with a valid account or profiling rule.
“Login Availability defines the timeframe during which the guest or contractor account is valid for network access. This schedule is enforced at the time of authentication. If a user attempts to log in outside of the designated window, the authentication is rejected by the system. Consequently, the host record will reflect a non-authenticated status, and the device will remain restricted to the isolation or registration network until a valid login window is reached.” – FortiNAC-F Administration Guide: Guest and Contractor Templates Section.

NEW QUESTION 37
When creating a device profiling rule, what are two advantages of registering the device in the host view?
(Choose two.)

The devices can be managed as a generic SNMP device.

The devices will have connection logs.

The devices can be associated with a user.

The devices can be polled for connection status.

In FortiNAC-F, theDevice Profileris a rule-based engine that evaluates unknown ” rogue ” devices and classifies them based on fingerprints and behavior. When a profiling rule matches a device, the administrator can configure the rule to automatically register that device. The registration process can place the device record in two primary locations: theTopology View(as a device) or theHost View(as a registered host).
According to theFortiNAC-F Administration Guide, registering a device in theHost Viewprovides significant advantages for identity management and historical tracking. First, the devices can beassociated with a user (C). In the FortiNAC database architecture, the Host View is the primary repository for endpoint identity; placing a profiled device here allows the system to link that hardware (MAC address) to a specific user account, whether that user is an employee, guest, or a system-level ” owner ” . This association is essential for Role-Based Access Control (RBAC) and for tracking accountability across the network fabric.
Second, devices registered in the Host View will haveconnection logs (B). FortiNAC-F maintains a detailed operational history for all host records, including every instance of the device connecting to or disconnecting from a port, its IP address assignments, and the specific policies applied during each session. These logs are invaluable for troubleshooting connectivity issues and for security forensic audits, as they provide a clear timeline of the device ‘ s lifecycle on the network. In contrast, devices managed only in the Topology View are typically treated as infrastructure components where the focus is on device availability rather than individual session history.
” Devices that are registered and associated with a user are placed in theHost Viewand removed from the Profiled Devices window… Placing a device in the Host View allows for the tracking ofconnection historyand the association of the device with a specificidentity or user recordwithin the FortiNAC database. ” – FortiNAC-F Administration Guide: Device Profiler How it Works.

NEW QUESTION 38
Refer to the exhibit.

An administrator wants to ensure that guest accounts created from this template are not allowed network access outside of the designated times.
To achieve this, all necessary configurations must be made to force isolation of hosts in which state?

At-risk

Disabled

Non-authenticated

Rogue

NEW QUESTION 39
Refer to the exhibits.

Given the current configuration, what would happen if a contractor triggered two of the defined security filters?