[Apr 09, 2022] NS0-592 Exam Brain Dumps – Study Notes and Theory [Q36-Q52]

Rate this post

[Apr 09, 2022] NS0-592 Exam Brain Dumps – Study Notes and Theory

Pass Network Appliance NS0-592 Test Practice Test Questions Exam Dumps

NEW QUESTION 36
Click the exhibit button.

A customer notifies you that Active IQ is showing a warning that a broadcast domain in their environment has been configured with ports from multiple VLANs.
Referring to the exhibit, which two statements are correct? (Choose two.)

You should move the e0M ports to a Broadcast Domain that is dedicated to only management traffic.

A VLAN tag cannot be assigned to the e0M port, so the configuration is acceptable.

You should configure e0M so that is tagged on VLAN 40.

You should change the LIF service policy to net-intercluster to prevent the LIFs from failing over to the e0M ports.

NEW QUESTION 37
A customer calls you about a performance issue that they experienced over the past few days. They want to know if data collection and root cause analysis (RCA) is possible for this issue. This issue appears to be a one time event.
Which tool would be used to satisfy the customer’s request?

perfstat

perfmon

OneCollect

Performance Archive

NEW QUESTION 38
Your customer has initiated several volume move commands to redistribute the workload in their 8-node cluster. To verify that this process is not affecting their client access, they were monitoring the network switches that provide client access, but they do not see the network load of the volume move command.
In this scenario, what is the reason for the behavior?

The volume move command uses the HA iWarp interconnect, not the client access switches.

The volume move command uses copy offload protocol, so it does not show up when monitored.

The volume move command uses the intercluster LIFs, not the data LIFs.

The volume move command uses the cluster interconnect switches, not the client access switches.

NEW QUESTION 39
A customer reports that a takeover has been disabled on an HA pair.
What would be a cause for this to happen?

The HA interconnect is not functioning properly.

There is a disk running too hot.

The interface for the hardware assist has become unavailable.

The cluster network is not functioning properly.

NEW QUESTION 40
A reboot was performed by a watchdog reset on the node.
In this scenario, which statement is true?

The service processor no longer responds.

In case of an L1 watchdog event, determine whether a panic message was recorded.

In case of an L2 watchdog event, determine whether a core was dumped.

The wafl_check command should be executed.

NEW QUESTION 41
Click the exhibit button.

You have just cabled a new shelf to a FAS8200. Running the system node run -node * sysconfig – a command indicates that multipath HA is configured. However, after running Config Advisor, you receive an error that your cabling is incorrect.
As indicated in the exhibit, which two actions will correct the cabling? (Choose two.)

Move the 0b SAS connection on the bottom controller to 0d on the bottom controller.

Move the 0b SAS connection on the top controller to 0d on the top controller.

Move the 0b SAS connection on the top controller to 0d on the bottom controller.

Move the 0b SAS connection on the bottom controller to 0d on the top controller.

NEW QUESTION 42
Click the exhibit button.

A customer reports that when they are failing over Hyper-V VMs, the process fails, and the server reports an error that indicates that there is something wrong with the storage.
Referring to the exhibit, which three actions would be required in ONTAP to solve this problem? (Choose three.)

Verify that the -symlink-properties parameter is enabled on the share.

Verify that the access-based-enumeration share parameter is configured.

Verify that the continuously -available share parameter is configured.

Verify that -offline-files parameter is set to manual on the share.

Verify that the oplocks share property is configured.

NEW QUESTION 43
Click the exhibit button.

A customer reports that storage latency has recently increased substantially. No changes have been introduced, and the traffic did not change.
Referring to the output shown in the exhibit, which corrective step should be taken?

Add more spindles.

Throttle the client traffic.

Perform the volume reallocation.

Move some volumes off the affected aggregate.

NEW QUESTION 44
A customer reports that OnCommand Performance Manager shows that the workload on node-02 in a 4-node cluster has increased to a level that is higher than the threshold. The customer wants to avoid this issue becoming a performance problem.
Which two actions would result in achieving this goal? (Choose two.)

Use the volume move command to move one or more volumes to another aggregate that is owned by another node that is less utilized.

Use the storage aggregate relocation command to offload an aggregate to its partner.

Use the storage aggregate scrub command to verify the parity on the busy aggregates.

Physically move the shelf to another node that is less utilized.

NEW QUESTION 45
In a 4-node cluster, nodes 1 and 2 are an HA pair, and nodes 3 and 4 are an HA pair. The following error appears in the log.
12/15/2018 15:48:47 node-2CRITICALclam.node.ooq: Node (name=node- 2, ID= 1001) is out of “CLAM quorum” (reason =quorum update).
In this scenario, which two statements are correct? (Choose two.)

All LUNs are offline in the cluster.

All LUNs are online in the cluster.

Node 1 takes over node 2.

Node 2 takes over node 1.

NEW QUESTION 46
A customer reports that copying data over iSCSI attached LUNs is taking significantly longer than usual. The customer asks you to help to identify the root cause of this problem.
Which two perfstat sections would you use to accomplish this task? (Choose two.)

stats lun

lun stats -vserver

statit

stats volume

NEW QUESTION 47
Click the exhibit button.

When you log in to a node, a warning is displayed as shown in the exhibit.
Which statement is correct in this scenario?

The node root volume was moved to a new aggregate.

The partner still hosts the CFO aggregate for the node.

One or more RDB db files are damaged due to an internal software error.

The node cannot communicate with the rest of the nodes in the cluster.

NEW QUESTION 48
You want to determine which SMB versions that a CIFS server can use when communicating with external servers.
Which two CIFS server settings should be reviewed to accomplish this task? (Choose two.)

smb2-enabled

smb1-enabled-for-dc-connections

smb2-enabled-for-dc-conections

smb1-enabled

NEW QUESTION 49
A customer is attempting to move from NFSv3 to NFSv4.x and reports that all attempts to mount using NFSv3 continue to be successful, however, all of their NFSv4.x mount attempts fail with an “access denied” error.
Which two statements would cause this error? (Choose two.)

The NFS server does not have NFSv4 enabled.

The SVM’s root volume allows execute access for all users.

The export policy applied to the data volume does not allow clients to access it using NFSv4.

The export policy applied to the SVM’s root volume does not allow the NFSv4 clients to access it.

NEW QUESTION 50
A customer has created an interface group (igroup) named a0a, a VLAN named a0a-2500, and a data LIF associated with the VLAN interface that has been assigned an IP of 10.254.10.100. The customer is able to ping 10.254.10.100 from a Windows client without any issues, but data traffic is not working.
In this scenario, what is the solution to the problem?

Disable flow control on the a0a interface.

Configure an appropriate service policy for the data LIF.

Correct the MTU mismatch between the broadcast domain configuration and the upstream network switches.

Allow data traffic by using LIF firewall policies.

NEW QUESTION 51
The error message shown below is reported in the EMS log file.
“[sis.changelog.full:warning]: Change logging metafile on volume DATA1 is full and can not hold any more fingerprint entries.” What are two ways to solve this problem? (Choose two.)

Clear the changelog manually so that the operation can restart.

Increase the size of the changelog to allow the operation to continue.

Modify the storage efficiency policy so that deduplication runs more frequently.

Modify the threshold that triggers a deduplication operation.

NEW QUESTION 52
A customer reports that one their SVMs has two default gateways. The customer wants to know whether this behavior is expected or if one of gateways should be deleted.
In this scenario, what do you tell the customer?

The configuration is acceptable if the customer configures different metrics on all defaults routes.

The configuration is acceptable only if both default gateways are in the same subnet.

This situation is a misconfiguration, and the customer should delete one of the default gateways because there can be only gateway for each SVM.

The configuration is acceptable. The customer can achieve load balancing between the default gateways by setting the same metric on all default routes.