Guaranteed High Marks with Updated & Real CTAL-TM_Syll2012 Dumps pdf Free Updates [Q59-Q80]

Rate this post

Guaranteed High Marks with Updated & Real CTAL-TM_Syll2012 Dumps pdf Free Updates

PASS RATE ISQI Certifications CTAL-TM_Syll2012 Certified Exam DUMP

ISQI CTAL-TM_Syll2012 (ISTQB Certified Tester Advanced Level – Test Manager [Syllabus 2012]) certification exam is designed for experienced software testers who want to enhance their skills in managing and leading software testing projects. ISTQB Certified Tester Advanced Level – Test Manager [Syllabus 2012] certification exam is based on the latest syllabus released in 2012 by the International Software Testing Qualifications Board (ISTQB). ISTQB Certified Tester Advanced Level – Test Manager [Syllabus 2012] certification exam is globally recognized and is a benchmark for professional excellence in software testing.

NO.59 Which of the following statements describing how identified product quality risks should be mitigated and managed, is true?
K2 1 credit

The extent of re-testing and regression testing activities should be based on the risk level

The identification of new risks, the re-assessment of the level of existing risks and the evaluation of the effectiveness of risk mitigation activities should only occur at the very beginning of a project

Risk mitigation of product quality risks can be effective only after starting test execution

The priority of the development and execution of tests should not be based on the risk level but only on the likelihood

NO.60 Defect Management
Consider a defect report and assume that a part of its lifecycle includes the following states:
New: Is the initial state
Working: Means that the developers are addressing the defect in order to produce a fix for the defect Clarification: Means that the developers need more information from the tester to address the defect and produce a fix for the defect and the tester is working to provide this information to the developers Verification: Means that a fix for the defect has been produced and the tester is running the adequate tests to verify whether the fix solves the defect Closed: is the final state Which of the following answers represents an invalid sequence of states that can’t lead the bug report to the
“Closed” state?
Number of correct responses: 1
K2 1 credit

New, Working, Verification, Working, Clarification, Working, Verification, Closed

New, Working, Clarification, Working, Verification, Closed

New, Working, Verification, Working, Clarification, Working, Closed

New, Working, Verification, Closed

NO.61 Test Management
Assume you have some data related to confirmation testing during system testing of a past project.
In that project 240 bug reports have been opened once, 80 were opened twice, 10 were opened three times and no bug reports have been opened more than three times.
You estimate that a bug report, which has failed its confirmation test, costs, on average, 3 person-hours.
Which of the following statements correctly describe the value of these confirmatory testing activities based on cost of quality?
Number of correct responses: 1
K3 2 credits

300 person-hours have been spent on the project during the system testing phase, because of the failed confirmation tests and this cost belongs to the costs of internal failure

340 person-hours have been spent on the project during the system testing phase, because of the failed confirmation tests and this cost belongs to the costs of external failure

340 person-hours have been spent on the project during the system testing phase, because of the failed confirmation tests and this cost belongs to the costs of internal failure

300 person-hours have been spent on the project during the system testing phase, because of the failed confirmation tests and this cost belongs to the costs of detection

NO.62 You are not confident with the assessment of the risk level and you suspect that it will be possible to find high-priority bugs in low-risk areas.
Furthermore the period for test execution is very short. Your goal is to test all the product risks in a risk-based way, while assuring that each product risk gets at least some amount of testing.

Which of the following answers describes the best test execution schedule in this scenario?
Number of correct responses: 1
K3 2 credits

T1, T2, T3, T4, T5, T6, T7, T8, T9, T10

T1, T3, T5, T7, T9, T2, T4, T6, T8, T10

T10, T9, T8, T7, T6, T5, T4, T3, T2, T1

T10, T8, T6, T4, T2, T9, T7, T5, T3, T1

NO.63 Test Management
Which of the following statements, about the test reporting activities for a project adopting an iterative lifecycle model with very short iterations (e.g. two weeks iterations), is correct?

Test reporting activities can’t be influenced by the use of an iterative lifecycle model with short iterations

Test reporting activities are not important for projects adopting an iterative lifecycle model with short iterations

Test reporting activities are less important for projects adopting an iterative life cycle model with short iterations. They should be performed at the end of the last iteration

Test reporting activities are still important with an iterative lifecycle. The reports can be used to conduct post-iteration review sessions before starting with the next iteration

NO.64 Test Management
Which of the following statements describing how identified product quality risks should be mitigated and managed, is true?

The extent of re-testing and regression testing activities should be based on the risk level

Risk mitigation of product quality risks can be effective only after starting test execution

The priority of the development and execution of tests should not be based on the risk level but only on the likelihood

NO.65 Which of the following metrics would be most beneficial to collect to determine the effectiveness of a review process? [2]

The number of defects found in production for each module that was reviewed

The development language used to create each module that was reviewed

The elapsed time between each module’s review and its corresponding deployment into production

The business criticality of each module that was reviewed

NO.66 After the presentation, you are asked to explain the chart.
Assume you have applied a full risk-based testing strategy.

Which of the following answers would you expect to best describe the pie chart?

All the risk items have been covered with tests. No more risk items remain to test

According to the full risk-based testing strategy applied, it is very likely that the highest-risk items, tests and bugs remain in the blue and red areas. Therefore, it is very risky to release the application

Only the lowest-risk items, tests and bugs should remain in the blue and red areas. Therefore the application can be released at any time subject to management of the items identified in those areas

97 percent of the risk items has been tested. No open bugs or test failures remain. Only 3 percent of risk items remains to be covered by the remaining test

NO.67 Test Management
Which of the following statements describing how identified product quality risks should be mitigated and managed, is true?

The extent of re-testing and regression testing activities should be based on the risk level

Risk mitigation of product quality risks can be effective only after starting test execution

The priority of the development and execution of tests should not be based on the risk level but only on the likelihood

NO.68 A chart showing the trend in the lag time from defect reporting to resolution during system testing is also available. The chart shows that the daily closure period is consistently and significantly above the rolling closure period for a long period of the system testing phase.
Almost all defects found during system testing have been related to the system as a whole, not related to single units or integrations issues. Almost all quality risks have been addressed during the unit and integration testing phase and no residual quality risks were present in the integrated system. This has been confirmed by exploratory testing sessions performed during system testing, targeted at finding defects in these quality risk areas.
Based on the given information only, which one of the following areas would you expect to be considered more in the retrospective meeting in order to be improved?

The requirements review

The defect management process

The quality risk analysis process

The system design and architecture design reviews

NO.69 Which of the following would you expect to be most likely an example of a motivating factor for testers?
K2 1 credit

The resources allocated for the testing activities are not sufficient and don’t allow the testers to contribute to the quality of the product

The testers contribution to the quality of the software products developed from an organization is recognized with increased responsibilities

The same regressions tests are executed manually by the same testers, for every product release, without any progression in content

The testers are asked to perform, in parallel with their testing tasks, other tasks unrelated to their testing responsibilities

NO.70 Test Management
The following chart plots the cumulative number of defects opened against the cumulative number of defects closed during system testing of a software product.

Which of the following statements is true?

The chart indicates that you have plenty of problems left to find

The chart can be used to reveal test progress problems

The chart seems to indicate that the defect management process is not working well

The chart seems to indicate that the defect management process is working well

NO.71 Test Management
You are performing a quality risk analysis for a CSCI (Computer Software Configuration Item) used to implement a CBIT (Continuous Built-In Test) module of a safety-critical system.
During the quality risk analysis you are trying to identify the ways in which failures of the CBIT module can occur, for each of them trying to determine the potential causes and likely effects, and the risk level (calculated as the product of three factors: severity, occurrence and detection).
Which of the following risk analysis techniques are you working with?

A lightweight product risk analysis technique

Failure Mode and Effect Analysis

Wide Band Delphi

Cost of Exposure

NO.72 During the system testing phase a tester from your test team observes a failure in the system under test and he/she decides to create an incident report. The incident report is currently in a “new” state, indicating it needs to be investigated.
Which THREE of the following information items can’t yet be present in the incident report?
K3 2 credits (2 credits out of 3 credits correct, 1 credit point)

The type of defect that caused the failure

The actual and the expected result highlighting the failure

The lifecycle phase in which the defect has been introduced

What really caused the failure (actual cause)

Steps to reproduce the failure, including screenshots, database dumps and logs where applicable

NO.73 Assume you are the Test Manager in charge of independent testing for avionics applications.
You are in charge of testing for a project to implement three different CSCI (Computer Software Configuration Item):
–
a BOOT-X CSCI that must be certified at level B of the DO-178B standard
–
a DIAG-X CSCI that must be certified at level C of the DO-178B standard
–
a DRIV-X CSCI that must be certified at level A of the DO-178B standard
These are three different software modules written in C language to run on a specific hardware platform.
You have been asked to select a single code coverage tool to perform the mandatory code coverage measurements, in order to meet the structural coverage criteria prescribed by the DO178B standard. This tool must be qualified as a verification tool under DO-178B.
Since there are significant budget constraints to purchase this tool, you are evaluating an open-source tool that is able to provide different types of code coverage. This tool meets perfectly your technical needs in terms of the programming language and the specific hardware platform (it supports also the specific C-compiler).
The source code of the tool is available.
Your team could easily customize the tool to meet the project needs. This tool is not qualified as a verification tool under the DO-178B.
Which of the following are the three main concerns related to that open-source tool selection?
K4 3 credits (2 credits out of 3 credits correct, 1 credit point)

Does the tool support all the types of code coverage required from the three levels A, B, C of the DO-178B standard?

Does the tool have a good general usability?

What are the costs to qualify the tool as a verification tool under the DO-178B?

Is the installation procedure of the tool easy?

Does the tool require a system with more than 4GB of RAM memory?

Is the licensing scheme of the tool compatible with the confidentiality needs of the avionics company?

NO.74 Test Management
For which of the following activities would the costs be classified as a cost of detection?
Number of correct responses: 1
K2 1 credit

Writing test specifications according to the test design

Training developers to better understand the new features of the coding language they will use on the project

Re-running a test case, during the system testing phase, to verify that a fix eliminates a previously found defect

Fixing field failures

NO.75 Assume that you are the Test Manager for a small banking application development project.
You have decided to adopt a risk-based testing strategy and 5 product risks (R1, R2, R3, R4, and R5) have been identified during the quality risk analysis.
The following table shows the risk level associated to these product risks (higher numbers mean higher risk):

55 test cases have been designed and implemented to cover all these 5 product risks. The coverage is described in a traceability matrix.
This is the test execution status table, after the after the first week of test execution:
About 56% of the planned test cases have been successfully executed.
Assume that no additional product risks have been identified during the first week of test
execution.

Which of the following answers would you expect to best describe the residual risks associated with the identified product risks, at the end of the first week of test execution?
K3 2 credits

Since R3 is the only risk for which all test cases have passed, the risk has been reduced by 20%

The test execution status table indicates that the risk has been reduced by 56%

The residual risk level can’t be determined, because it requires that all the test cases have been executed

The test execution table doesn’t give an indication of the risk level of the open defects and the test cases that failed or are not run yet

NO.76 Your test team consists of four members (Mary, Bob, Mark, Dave) with different interpersonal skills.
The following skills assessment spreadsheet shows the characteristics of the team members with respect to a list of interpersonal-skills (for each characteristic only the member with the highest level of that characteristic is indicated and marked with ‘X’): On the next project a member of your test team will have to perform some routine tasks requiring collaboration with other teams.

Who in your test team would you expect to be most suitable at doing these tasks?
K4 3 credits

Mary

Bob

Mark

Dave

NO.77 You are the Test Manager of a four-person test team working for a small distribution company with a single warehouse. Your team has been working with a third party development team on a new inventory management system. The company expects this system to generate approximately one million dollars per annum in profits for the company. Early in the project, various risks were identified, and steps taken to mitigate those risks.
For example, you sent your test team for training on the new system, and upgraded the test environment. There are still some lingering risks that have not been addressed, but they have been determined to have a low chance of occurring, with minimal impact if they do occur.
What would be the best option to mitigate these remaining risks? [3]

Note the risks, and ignore them for now.

Redo the project test plan to add additional testing for these risk items.

Contract with the Risk Protection Insurance company to assume these risks at a cost of $500,000 per annum.

Create a cross-functional team to work to reduce the impact and likelihood of these risks coming to fruition.

NO.78 Test Management
Which one of the following metrics to be produced needs traceability between the test cases and each item in a proper test basis?

Requirements coverage

Trends in the lag time from defect reporting to resolution

Mean time between failures for the system

Cumulative number of reported defects versus cumulative number of resolved defects

NO.79 Assume that the following test cases have been executed at the end of the first week of test execution: TC-001, TC-002 and TC-007. All these tests are ‘passes’.

What is the MINIMUM number of the remaining test cases that must be successfully executed to fulfill the EX1 exit criteria?
K3 2 credits

NO.80 Consider the following skills assessment spreadsheet for your test team (consisting of four team members):
This spreadsheet has three sections: technical expertise, testing skills and professionalism.
The skill levels for each skill area for both the “technical expertise” and “testing skills” sections have been rated on a four-point scale:
-E (Expert): indicates that a person has expert knowledge and experience in the skill area
-B (Beginner): indicates that a person has some knowledge and experience in the skill area but he/she is not autonomous
-W (Wants to learn): indicates that a person has no knowledge or experience in the skill area but he/she wants to learn that skill
-NI (Not Interested): indicates that a person has no knowledge or experience in the skill area and he/she is not interested to learn that skill
The skill levels for each skill area of the “professionalism” section have been rated on a three point scale (H=High, M=Medium, L=Low).
Consider the following analysis of testing skills performed on four peoplE. Alex, Robert, John and Mark (all the skills have been rated on an ascending scalE. The higher the score, the better the skill): Which of these people, based on this analysis, would you expect to be most suitable to work specifically as test designer?

K4 3 credits

Alex

Roberta

John

Mark

The CTAL-TM_Syll2012 exam is designed to test the candidate’s understanding of software testing methodologies, test management processes, and project management principles. CTAL-TM_Syll2012 exam covers a range of topics including risk-based testing, test estimation and planning, test monitoring and control, test process improvement, and team leadership.

Best CTAL-TM_Syll2012 Exam Preparation Material with New Dumps Questions: https://www.examstorrent.com/CTAL-TM_Syll2012-exam-dumps-torrent.html